Programm
Kraftwerk Batterie
am 24.-25. März 2020

ÜBERSICHT: PARALLELSESSIONS UND POSTERAUSSTELLUNG

PROGRAMMFLYER
(Download PDF)

1. Tag // 24. März 2020

09:00 – 10:00

Anmeldung

10:00 – 10:10

Eröffnung

Prof. Dr. Martin Winter
MEET, WWU Münster

10:10 – 10:30

Grußworte

Prof. Dr. Werner Klaffke
Haus der Technik e.V.

Engelbert Beyer
BMBF, Head of Directorate 52

10:30 – 11:05

Plenarvortrag 1

A research factory for battery cell production – developing a suitable infrastructure
Prof. Dr. Jens Tübke, Fraunhofer ICT

11:05 – 11:40

Plenarvortrag 2

An unavoidable challenge for Ni-rich positive electrode materials for lithium-ion batteries
Prof. Jeff Dahn, Dalhousie University, Canada

11:40 – 12:15

Plenarvortrag 3

Towards cost and CO2 friendly value chains for lithium-ion cell production
Robert Stanek, P3-Group

12:15 – 13:50

Mittagspause mit Postersession und Ausstellung

Parallelsession 1

13:50 – 15:40

Session 1A: Lithium Ion Cells: Materials and Improvements on Properties
Veranstaltungsort: Kongress-Saal
Sessionleiter: Dr. Volker Hennige // Dr. Peter Pilgram

13:50	Pure Silicon based Li-Ion-Cell with innovative 3D-Electrodes and porous cell architecture for Pre-Lithiation and Formation of a stacked Multilayer Cell	Dr. Peter Axmann	Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)
14:20	Influence of Nickel Content on the Electrochemical Performance and Safety of Ni-Rich Cathode Materials Synthesized by Couette–Taylor Flow Reactor	Dr.-Ing. Vassilios Siozios	MEET - Münster Electrochemical Energy Technology, WWU Münster
14:40	Composite electroforming as a production process for novel, structured and additive-free electrodes for Li-Ion-batteries	Joanna Komorowska	Aalen University
15:00	Stabilizing Capacity Retention in NMC811/Graphite Full Cells via TMSPi Electrolyte Additives	Dr. Ruben-Simon Kühnel	Empa
15:20	New flexible and cost efficient bipolar battery concept for Lithium and Nickel-Iron chemistry	Dr. Mareike Wolter	Fraunhofer-Institut für Keramische Technologien und Systeme IKTS

24.3.2020
Session 1A

13:50 Uhr
Dr. Peter Axmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

Pure Silicon based Li-Ion-Cell with innovative 3D-Electrodes and porous cell architecture for Pre-Lithiation and Formation of a stacked Multilayer Cell

24.03.2020
Session 1A

14:20 Uhr
Dr.-Ing. Vassilios Siozios
MEET - Münster Electrochemical Energy Technology, WWU Münster

Influence of Nickel Content on the Electrochemical Performance and Safety of Ni-Rich Cathode Materials Synthesized by Couette–Taylor Flow Reactor

24.03.2020
Session 1A

14:40 Uhr
Joanna Komorowska
Aalen University

Composite electroforming as a production process for novel, structured and additive-free electrodes for Li-Ion-batteries

24.03.2020
Session 1A

15:00 Uhr
Dr. Ruben-Simon Kühnel
Empa

Stabilizing Capacity Retention in NMC811/Graphite Full Cells via TMSPi Electrolyte Additives

24.03.2020
Session 1A

15:20 Uhr
Dr. Mareike Wolter
Fraunhofer-Institut für Keramische Technologien und Systeme IKTS

New flexible and cost efficient bipolar battery concept for Lithium and Nickel-Iron chemistry

13:50 – 15:40

Session 1B: Battery Systems
Veranstaltungsort: Roter Saal
Sessionleiter: Dr. Margret Wohlfahrt-Mehrens // Dr. Peter Weirich

13:50	Statistical methodology for evaluating capacity degradation and lifetime of batteries based on aging tests	Prof. Dr. Maria Kateri	RWTH Aachen University
14:20	Predicting the onset of rapid battery degradation using data-drive approaches	Sam Greenbank	University of Oxford
14:40	Battery Cloud: Data-Powered Intelligent Battery Management for Mobile and Stationary Battery Systems	M. Sc. Weihan Li	Institut für Stromrichter und elektrische Antriebe (ISEA), RWTH Aachen
15:00	Accelerating Science – Software based Data Evaluation and Organisation	Dr. Markus Hagen	Fraunhofer ICT
15:20	Different Methods for Physically Motivated Parameterization of High Power Lithium-Ion Battery Cells over	Stephan Bihn	RWTH Aachen University

24.03.2020
Session 1B

13:50 Uhr
Prof. Dr. Maria Kateri
RWTH Aachen University

Statistical methodology for evaluating capacity degradation and lifetime of batteries based on aging tests

24.03.2020
Session 1B

14:20 Uhr
Sam Greenbank
University of Oxford

Predicting the onset of rapid battery degradation using data-drive approaches

24.03.2020
Session 1B

14:40 Uhr
M. Sc. Weihan Li
Institut für Stromrichter und elektrische Antriebe (ISEA), RWTH Aachen

Battery Cloud: Data-Powered Intelligent Battery Management for Mobile and Stationary Battery Systems

24.03.2020
Session 1B

15:00 Uhr
Dr. Markus Hagen
Fraunhofer ICT

Accelerating Science – Software based Data Evaluation and Organisation

24/03/2020
Session 1B

15:20 Uhr
Stephan Bihn
RWTH Aachen University

Different Methods for Physically Motivated Parameterization of High Power Lithium-Ion Battery Cells over

13:50 – 15:40

Session 1C: Automotive and Mobile Applications
Veranstaltungsort: Weißer Saal
Sessionleiter: Prof. Dr. Hans-Georg Schweiger // Dr.-Ing. Eckhard Karden

13:50	Quantification of lithium plating with a validated physicochemical model	Prof. Dr. Wolfgang Bessler	Hochschule Offenburg
14:20	First and second degassing of automotive Lithium-Ion batteries at overtemperature experiments	Dipl.-Ing. Christiane Essl	Virtual Vehicle Research GmbH
14:40	The Cell Cooling Coefficient: A Standard to Define Heat Rejection from Lithium-Ion Batteries	Dr. Alastair Hales	Imperial College London
15:00	Charging Station Deployment and Usage in Germany and around the World	Christopher Olk	Institut für Stromrichtertechnik und Elektrische Antriebe, RWTH Aachen
15:20	Advanced cycle analysis as an integral part of the damage estimation of lithium-ion batteries in real vehicle applications	Dipl.-Ing. Lutz Morawietz	Institute of Automotive Mechatronics GmbH

24.03.2020
Session 1C

13:50 Uhr
Prof. Dr. Wolfgang Bessler
Hochschule Offenburg

Quantification of lithium plating with a validated physicochemical model

24.03.2020
Session 1C

14:20 Uhr
Dipl.-Ing. Christiane Essl
Virtual Vehicle Research GmbH

First and second degassing of automotive Lithium-Ion batteries at overtemperature experiments

24.03.2020
Session 1C

14:40 Uhr
Dr. Alastair Hales
Imperial College London

The Cell Cooling Coefficient: A Standard to Define Heat Rejection from Lithium-Ion Batteries

24.03.2020
Session 1C

15:00 Uhr
Christopher Olk
Institut für Stromrichtertechnik und Elektrische Antriebe, RWTH Aachen

Charging Station Deployment and Usage in Germany and around the World

24.03.2020
Session 1C

15:20 Uhr
Dipl.-Ing. Lutz Morawietz
Institute of Automotive Mechatronics GmbH

Advanced cycle analysis as an integral part of the damage estimation of lithium-ion batteries in real vehicle applications

15:40 – 16:30

Pause mit Postersession und Ausstellung

Parallelsession 2

16:30 – 18:00

Session 2A: Lithium Ion Cells: Materials and Improvements on Properties
Veranstaltungsort: Kongress-Saal
Sessionleiter: Prof. Dr. Petr Novák // Prof. Egbert Figgemeier

16:30	GD-OES Depth Profiling – A valuable new Technique to Study Aging Effects in Li-ion Cells	Dr.rer.nat. Thomas Waldmann	Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)
17:00	Optimization of Electrode Processing and Electrochemical Performance of LiFePO4 Based Electrodes for Stationary Energy Storage Applications	Anna Weichert	MEET Battery Research Center
17:20	Designer Electrolyte Additive Enabled High-Performance NMC622/Silicon-Graphite Pouch Cells	Dr. Gebrekidan Gebresilassie Eshetu	RWTH
17:40	Investigation of the influence of varying structure and material parameters on the effective thermal conductivity of porous electrodes	Dieter Oehler	Karlsruhe Institute of Technology (KIT)

24.03.2020
Session 2A

16:30 Uhr
Dr.rer.nat. Thomas Waldmann
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

GD-OES Depth Profiling – A valuable new Technique to Study Aging Effects in Li-ion Cells

24.03.2020
Session 2A

17:00 Uhr
Anna Weichert
MEET Battery Research Center

Optimization of Electrode Processing and Electrochemical Performance of LiFePO4 Based Electrodes for Stationary Energy Storage Applications

24.03.2020
Session 2A

17:20 Uhr
Dr. Gebrekidan Gebresilassie Eshetu
RWTH

Designer Electrolyte Additive Enabled High-Performance NMC622/Silicon-Graphite Pouch Cells

24.03.2020
Session 2A

17:40 Uhr
Dieter Oehler
Karlsruhe Institute of Technology (KIT)

Investigation of the influence of varying structure and material parameters on the effective thermal conductivity of porous electrodes

16:30 – 18:00

Session 2B: Industry session
Veranstaltungsort: Roter Saal
Sessionleiter: Armin Warm // Dr. Thomas Hülshorst

16:30	Batteries in A 48V system – requirements and challenges	Bastian Hartmann	Ford
17:00	48V batteries, technical solutions to meet OEM requirements	Dr. Michael Stapelbroek	FEV Europe GmbH
17:20	48V cell and pack development – the supplier view	Christoph Fehrenbacher	A123

24.03.2020
Session 2B

16:30 Uhr
Bastian Hartmann
Ford

Batteries in A 48V system – requirements and challenges

24.03.2020
Session 2B

17:00 Uhr
Dr. Michael Stapelbroek
FEV Europe GmbH

48V batteries, technical solutions to meet OEM requirements

24.03.2020
Session 2B

17:20 Uhr
Christoph Fehrenbacher
A123

48V cell and pack development – the supplier view

16:30 – 18:00

Session 2C: Stationary Battery Systems and Markets
Veranstaltungsort: Weißer Saal
Sessionleiter: Prof. Dr.-Ing. Andreas Jossen // Dr. Alexander Warnecke

16:30	Extended warranty for battery systems: forging a probabilistic view on battery degradation	Prof. Dr.-Ing. habil. Harry Hoster	Lancaster University
17:00	Technical Analysis of Peak Shaving and Load Smoothing in a Distribution Grid with Battery Energy Storage Systems	M.Sc. Daniel Kucevic	Technical University of Munich
17:20	Techno-Economic Optimization of Residential and Industry Scale Battery Storage Systems in a Sector Coupling Environment.	Dr. Holger Hesse	Technische Universität München
17:40	Ageing of PV Home Storage Systems based on High-Resolution Field Measurements	M.Sc. Jan Figgener	ISEA, RWTH Aachen University

24.03.2020
Session 2C

16:30 Uhr
Prof. Dr.-Ing. habil. Harry Hoster
Lancaster University

Extended warranty for battery systems: forging a probabilistic view on battery degradation

24.03.2020
Session 2C

17:00 Uhr
M.Sc. Daniel Kucevic
Technical University of Munich

Technical Analysis of Peak Shaving and Load Smoothing in a Distribution Grid with Battery Energy Storage Systems

24.03.2020
Session 2C

17:20 Uhr
Dr. Holger Hesse
Technische Universität München

Techno-Economic Optimization of Residential and Industry Scale Battery Storage Systems in a Sector Coupling Environment.

24.03.2020
Session 2C

17:40 Uhr
M.Sc. Jan Figgener
ISEA, RWTH Aachen University

Ageing of PV Home Storage Systems based on High-Resolution Field Measurements

18:00

Ende des ersten Veranstaltungstages

19:30 – 22:30

Abendveranstaltung

Posterprämierung
Der Posterpreis ist eines der traditionellen Highlights der Batterietagung. 2020 werden Posterpreise in Höhe von 1000.-€, 750.-€ und 500.-€ für die drei besten Poster von Volkswagen AG, ISE International Organisation of Electrochemistry und Haus der Technik e.V. gestiftet.

2. Tag // 25. März 2020

09:00 – 09:35

Plenarvortrag 4

Research needs for a sustainable EV Li-Battery Recycling
Prof. Dr. Bernd Friedrich, IME, RWTH Aachen

09:35 – 10:10

Plenarvortrag 5

From materials research to sensing approaches for better batteries
Prof. Dr. Jean-Marie Tarascon, College de France

10:10 – 10:45

Plenarvortrag 6

Advanced next generation lithium battery and beyond
Dr. Khalil Amine, Argonne National Laboratory

10:45 – 11:20

Plenarvortrag 7

Development of electrolyte for lithium ion battery
Iwao Soga, Mitsubishi Chemical Corporation

11:20 – 13:00

Mittagspause mit Postersession und Ausstellung

Parallelsession 3

13:00 – 14:50

Session 3A: Beyond and Beside Lithium Ion Technology
Veranstaltungsort: Kongress-Saal
Sessionleiter: Prof. Dr. Kristina Edström // Prof. Dr. Jürgen Janek

13:00	Solvent-Free Preparation Of Sulfide Electrolyte Based Solid-State Batteries	Dr. Felix Hippauf	Fraunhofer Institute for Material and Beam Technology
13:30	Prospects of all-solid-state sodium batteries operated at room temperature	Laura Goodwin	Justus-Liebig-Universität Gießen
13:50	Comparing Lithiation and Sodiation of a Hard Carbon Anode Using In Situ Impedance Spectroscopy	Fabian Linsenmann	Technische Universität München
14:10	Origin of Capacity Fade of pure layered P2-NaxMnyNi1-yO2 Cathode Materials with Controlled Particle Architecture	M.Sc. Lukas Schick	Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)
14:30	Solid-State Lithium-Sulfur Battery enabled by Polymer-In-Ceramic Composite Electrolytes	Meirong Li	University Münster

25.03.2020
Session 3A

13:00 Uhr
Dr. Felix Hippauf
Fraunhofer Institute for Material and Beam Technology

Solvent-Free Preparation Of Sulfide Electrolyte Based Solid-State Batteries

25.03.2020
Session 3A

13:30 Uhr
Laura Goodwin
Justus-Liebig-Universität Gießen

Prospects of all-solid-state sodium batteries operated at room temperature

25.03.2020
Session 3A

13:50 Uhr
Fabian Linsenmann
Technische Universität München

Comparing Lithiation and Sodiation of a Hard Carbon Anode Using In Situ Impedance Spectroscopy

25.03.2020
Session 3A

14:10 Uhr
M.Sc. Lukas Schick
Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)

Origin of Capacity Fade of pure layered P2-NaxMnyNi1-yO2 Cathode Materials with Controlled Particle Architecture

25.03.2020
Session 3A

14:30 Uhr
Meirong Li
University Münster

Solid-State Lithium-Sulfur Battery enabled by Polymer-In-Ceramic Composite Electrolytes

13:00 – 14:50

Session 3B: Production, 2nd Life and Recycling of Battery Systems and Cells
Veranstaltungsort: Roter Saal
Sessionleiter: Prof. Dr. Jens Tübke // Prof. Dr. Bernd Friedrich

13:00	Fully continuous processing of LIB electrode slurries: a highly versatile and cost-effective manufacturing method	Dr. Philipp Stoessel	Bühler AG
13:30	Potentials towards efficient recycling of valuable metals from spent Li ion batteries	Dr. Elsayed Mousa	Swerim AB
13:50	Microstructural defects in Li-ion batteries and their detection with imaging techniques as a tool for process development and quality evaluation	Andreas Kopp	Hochschule Aalen
14:10	A Joining Aspect in the Battery Production – Ultrasonic Welding of Thin Metal Sheets	Houssin Wehbe	TU Braunschweig, Institut für Füge- und Schweißtechnik
14:30	Cyber-physical system based data mining in battery production for multi-criterial quality prediction	Artem Turetskyy	TU Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik

25.03.2020
Session 3B

13:00 Uhr
Dr. Philipp Stoessel
Bühler AG

Fully continuous processing of LIB electrode slurries: a highly versatile and cost-effective manufacturing method

25.03.2020
Session 3B

13:30 Uhr
Dr. Elsayed Mousa
Swerim AB

Potentials towards efficient recycling of valuable metals from spent Li ion batteries

25.03.2020
Session 3B

13:50 Uhr
Andreas Kopp
Hochschule Aalen

Microstructural defects in Li-ion batteries and their detection with imaging techniques as a tool for process development and quality evaluation

25.03.2020
Session 3B

14:10 Uhr
Houssin Wehbe
TU Braunschweig, Institut für Füge- und Schweißtechnik

A Joining Aspect in the Battery Production – Ultrasonic Welding of Thin Metal Sheets

25.03.2020
Session 3B

14:30 Uhr
Artem Turetskyy
TU Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik

Cyber-physical system based data mining in battery production for multi-criterial quality prediction

13:00 – 14:50

Session 3C: Battery Systems
Veranstaltungsort: Weißer Saal
Sessionleiter: Dr. Eberhard Meissner // Prof. Dr.-Ing. Kai-Peter Birke

13:00	Controlling module pressure evolution over lifetime with buffer layers: Design guidelines, prediction and validation for automotive systems	Severin Hahn	Daimler AG
13:30	Thermal runaway initiation and propagation in commercial automotive lithium-ion cells and modules	Andreas Podias	European Commission
13:50	Dynamic Electrochemical Impedance Spectroscopy as a versatile tool for battery characterization and diagnosis	Hendrik Zappen	ISEA RWTH Aachen / Safion GmbH
14:10	Mixed Ageing Modelling of Lithium Ion Batteries	M. Sc. Felix Hildenbrand	RWTH Aachen University
14:30	(Dis-) Advantages of different system connections and the importance of cross-connectors in serial and parallel connected systems.	Markus Schindler	Technical University Munich

25.03.2020
Session 3C

13:00 Uhr
Severin Hahn
Daimler AG

Controlling module pressure evolution over lifetime with buffer layers: Design guidelines, prediction and validation for automotive systems

25.03.2020
Session 3C

13:30 Uhr
Andreas Podias
European Commission

Thermal runaway initiation and propagation in commercial automotive lithium-ion cells and modules

25.03.2020
Session 3C

13:50 Uhr
Hendrik Zappen
ISEA RWTH Aachen / Safion GmbH

Dynamic Electrochemical Impedance Spectroscopy as a versatile tool for battery characterization and diagnosis

25.03.2020
Session 3C

14:10 Uhr
M. Sc. Felix Hildenbrand
RWTH Aachen University

Mixed Ageing Modelling of Lithium Ion Batteries

25.03.2020
Session 3C

14:30 Uhr
Markus Schindler
Technical University Munich

(Dis-) Advantages of different system connections and the importance of cross-connectors in serial and parallel connected systems.

14:50 – 15:40

Postersession und Ausstellung

Parallelsession 4

15:40 – 17:30

Session 4A: Lithium Ion Cells: Materials and Improvements on Properties
Veranstaltungsort: Kongress-Saal
Sessionleiter: Dr. Gerhard Hörpel // Dr. Thomas Soczka-Guth

15:40	Mechanical characterization of the cathode active layer in lithium-ion batteries	Priyank Gupta	KTH Royal Institute of Technology
16:10	Novel electrolyte with super high ionic conductivity for LIB	Dr. Naoki Matsuoka	Asahi Kasei Corporation
16:30	How to design better cells to improve performance and extend lifetime	Ryan Prosser	Imperial College London
16:50	Impact of the crystalline Li15Si4 phase on the self-discharge mechanism of silicon negative electrodes in organic electrolytes	Peer Bärmann	Münster Electrochemical Energy Technology
17:10	Energy density and lifetime limitations of layered oxides (LiMeO2, Me = Co, Ni, Mn)	Dr. Karin Kleiner	Westfälische Wilhelms-Universität

25.03.2020
Session 4A

15:40 Uhr
Priyank Gupta
KTH Royal Institute of Technology

Mechanical characterization of the cathode active layer in lithium-ion batteries

25.03.2020
Session 4A

16:10 Uhr
Dr. Naoki Matsuoka
Asahi Kasei Corporation

Novel electrolyte with super high ionic conductivity for LIB

25.03.2020
Session 4A

16:30 Uhr
Ryan Prosser
Imperial College London

How to design better cells to improve performance and extend lifetime

25.03.2020
Session 4A

16:50 Uhr
Peer Bärmann
Münster Electrochemical Energy Technology

Impact of the crystalline Li15Si4 phase on the self-discharge mechanism of silicon negative electrodes in organic electrolytes

25.03.2020
Session 4A

17:10 Uhr
Dr. Karin Kleiner
Westfälische Wilhelms-Universität

Energy density and lifetime limitations of layered oxides (LiMeO2, Me = Co, Ni, Mn)

15:40 – 17:30

Session 4B: Production, 2nd Life and Recycling of Battery Systems and Cells
Veranstaltungsort: Roter Saal
Sessionleiter: Dr. Sebastian Menne // Dr. Matthias Ullrich

15:40	Formation - a critical production step for cell quality?	Dr. Philip Niehoff	MEET Batterieforschungszentrum, Universität Münster
16:10	Production Research as Key Factor for Successful Implementation of Battery Production in Germany on the Example of Up-Scaling Nickel-Rich NMCs Electrodes	Dr Miriam Keppeler	Zentrum für Sonnenenergie-und Wasserstoff- Forschung Baden-Württemberg (ZSW)
16:30	Quality assurance in lithium-ion battery manufacturing using X-ray computed tomography	Dr.-Ing Pascal Pinter	Volume Graphics GmbH
16:50	Extrusion-based Slot-die Coating of Electrodes for High-Capacity Li-Ion Batteries	Sebastian Reuber	Fraunhofer IKTS
17:10	At the pulse of electro mobility: Contacting battery cells using a nanosecond-pulsed laser welding process	Elie Haddad	Fraunhofer Institut für Lasertechnik

15:40	25.03.2020 Session 4B 15:40 Uhr Dr. Philip Niehoff MEET Batterieforschungszentrum, Universität Münster Formation - a critical production step for cell quality?
16:10	25.03.2020 Session 4B 16:10 Uhr Dr Miriam Keppeler Zentrum für Sonnenenergie-und Wasserstoff- Forschung Baden-Württemberg (ZSW) Production Research as Key Factor for Successful Implementation of Battery Production in Germany on the Example of Up-Scaling Nickel-Rich NMCs Electrodes
16:30	25.03.2020 Session 4B 16:30 Uhr Dr.-Ing Pascal Pinter Volume Graphics GmbH Quality assurance in lithium-ion battery manufacturing using X-ray computed tomography
16:50	25.03.2020 Session 4B 16:50 Uhr Sebastian Reuber Fraunhofer IKTS Extrusion-based Slot-die Coating of Electrodes for High-Capacity Li-Ion Batteries
17:10	25.03.2020 Session 4B 17:10 Uhr Elie Haddad Fraunhofer Institut für Lasertechnik At the pulse of electro mobility: Contacting battery cells using a nanosecond-pulsed laser welding process

15:40 – 17:30

Session 4C: Battery Systems
Veranstaltungsort: Weißer Saal
Sessionleiter: Stefan Werkstetter // Prof. Dr. Peter H.L. Notten

15:40	New Insights in gas pressure evolution in Lithium-Ion Batteries containing layered Ni-rich cathodes	Philipp Teichert	Volkwagen AG
16:10	Influence of path dependency on the state of health of Lithium-Ion batteries in electric vehicles	Trishna Raj	University of Oxford
16:30	Improved SOC and SOH estimators by considering the effect of rest periods analyzed with half-cell data	Mikel Arrinda	CIDETEC Energy Storage
16:50	Fast-charging in practice – a way to get it done!	Dr. Michael Schönleber	Batemo GmbH
17:10	New insights into the capacity fading mechanisms of lithium ion batteries - Investigation of transition metal oxidation states in electrolytes by means of capillary electrophoresis	Lenard Hanf	MEET Battery Research Center

25.03.2020
Session 4C

15:40 Uhr
Philipp Teichert
Volkwagen AG

New Insights in gas pressure evolution in Lithium-Ion Batteries containing layered Ni-rich cathodes

25.03.2020
Session 4C

16:10 Uhr
Trishna Raj
University of Oxford

Influence of path dependency on the state of health of Lithium-Ion batteries in electric vehicles

25.03.2020
Session 4C

16:30 Uhr
Mikel Arrinda
CIDETEC Energy Storage

Improved SOC and SOH estimators by considering the effect of rest periods analyzed with half-cell data

25.03.2020
Session 4C

16:50 Uhr
Dr. Michael Schönleber
Batemo GmbH

Fast-charging in practice – a way to get it done!

25.03.2020
Session 4C

17:10 Uhr
Lenard Hanf
MEET Battery Research Center

New insights into the capacity fading mechanisms of lithium ion batteries - Investigation of transition metal oxidation states in electrolytes by means of capillary electrophoresis

17:30

Ende der Tagung

17:30

Führung durch das MEET Batterieforschungszentrum

exklusiv für Teilnehmer

Das MEET Batterieforschungszentrum bietet den Teilnehmern des Batterietags NRW und der Konferenz Kraftwerk Batterie an, das Institut im Anschluss an die Veranstaltung zu besuchen. Im Rahmen einer geführten Tour können sowohl Labore als auch das 1000m² große Technikum besichtigt werden.
Die Fahrt zum MEET wird mit einem Sonderbus organisiert. An den Führungen können jeweils maximal 45 Personen teilnehmen.

Adresse:
MEET Batterieforschungszentrum
Corrensstraße 46, 48149 Münster

Start der Führung: Foyer des MEET
Abfahrt: Bushaltestelle vor der Halle Münsterland
Ende der Führung: Rückfahrt zur Halle Münsterland möglich
Besichtigungsdauer: ca. 60 Minuten

WEITERE INFOS