Gesamtprogramm Parallelsessions und Posterausstellung

1. Parallelsessions

Hier finden Sie alle Vorträge. Suchen Sie komfortabel nach einzelnen Vortragenden oder Sessions und drucken Sie sich ein entsprechendes PDF-Dokument.
Bitte beachten Sie die unten stehende Tabelle mit allen wissenschaftlichen Postern.

Datum_Uhrzeit	Session	Titel	Autor	Firma
24.3.2/13:50	1A	Pure Silicon based Li-Ion-Cell with innovative 3D-Electrodes and porous cell architecture for Pre-Lithiation and Formation of a stacked Multilayer Cell	Dr. Peter Axmann	Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)
24.03./14:20	1A	Influence of Nickel Content on the Electrochemical Performance and Safety of Ni-Rich Cathode Materials Synthesized by Couette–Taylor Flow Reactor	Dr.-Ing. Vassilios Siozios	MEET - Münster Electrochemical Energy Technology, WWU Münster
24.03./14:40	1A	Composite electroforming as a production process for novel, structured and additive-free electrodes for Li-Ion-batteries	Joanna Komorowska	Aalen University
24.03./15:00	1A	Stabilizing Capacity Retention in NMC811/Graphite Full Cells via TMSPi Electrolyte Additives	Dr. Ruben-Simon Kühnel	Empa
24.03./15:20	1A	New flexible and cost efficient bipolar battery concept for Lithium and Nickel-Iron chemistry	Dr. Mareike Wolter	Fraunhofer-Institut für Keramische Technologien und Systeme IKTS
24.03./13:50	1B	Statistical methodology for evaluating capacity degradation and lifetime of batteries based on aging tests	Prof. Dr. Maria Kateri	RWTH Aachen University
24.03./14:20	1B	Predicting the onset of rapid battery degradation using data-drive approaches	Sam Greenbank	University of Oxford
24.03./14:40	1B	Battery Cloud: Data-Powered Intelligent Battery Management for Mobile and Stationary Battery Systems	M. Sc. Weihan Li	Institut für Stromrichter und elektrische Antriebe (ISEA), RWTH Aachen
24.03./15:00	1B	Accelerating Science – Software based Data Evaluation and Organisation	Dr. Markus Hagen	Fraunhofer ICT
24/03//15:20	1B	Different Methods for Physically Motivated Parameterization of High Power Lithium-Ion Battery Cells over	Stephan Bihn	RWTH Aachen University
24.03./13:50	1C	Quantification of lithium plating with a validated physicochemical model	Prof. Dr. Wolfgang Bessler	Hochschule Offenburg
24.03./14:20	1C	First and second degassing of automotive Lithium-Ion batteries at overtemperature experiments	Dipl.-Ing. Christiane Essl	Virtual Vehicle Research GmbH
24.03./14:40	1C	The Cell Cooling Coefficient: A Standard to Define Heat Rejection from Lithium-Ion Batteries	Dr. Alastair Hales	Imperial College London
24.03./15:00	1C	Charging Station Deployment and Usage in Germany and around the World	Christopher Olk	Institut für Stromrichtertechnik und Elektrische Antriebe, RWTH Aachen
24.03./15:20	1C	Advanced cycle analysis as an integral part of the damage estimation of lithium-ion batteries in real vehicle applications	Dipl.-Ing. Lutz Morawietz	Institute of Automotive Mechatronics GmbH
24.03./16:30	2A	GD-OES Depth Profiling – A valuable new Technique to Study Aging Effects in Li-ion Cells	Dr.rer.nat. Thomas Waldmann	Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)
24.03./17:00	2A	Optimization of Electrode Processing and Electrochemical Performance of LiFePO4 Based Electrodes for Stationary Energy Storage Applications	Anna Weichert	MEET Battery Research Center
24.03./17:20	2A	Designer Electrolyte Additive Enabled High-Performance NMC622/Silicon-Graphite Pouch Cells	Dr. Gebrekidan Gebresilassie Eshetu	RWTH
24.03./17:40	2A	Investigation of the influence of varying structure and material parameters on the effective thermal conductivity of porous electrodes	Dieter Oehler	Karlsruhe Institute of Technology (KIT)
24.03./16:30	2B	Batteries in A 48V system – requirements and challenges	Bastian Hartmann	Ford
24.03./17:00	2B	48V batteries, technical solutions to meet OEM requirements	Dr. Michael Stapelbroek	FEV Europe GmbH
24.03./17:20	2B	48V cell and pack development – the supplier view	Christoph Fehrenbacher	A123
24.03./16:30	2C	Extended warranty for battery systems: forging a probabilistic view on battery degradation	Prof. Dr.-Ing. habil. Harry Hoster	Lancaster University
24.03./17:00	2C	Technical Analysis of Peak Shaving and Load Smoothing in a Distribution Grid with Battery Energy Storage Systems	M.Sc. Daniel Kucevic	Technical University of Munich
24.03./17:20	2C	Techno-Economic Optimization of Residential and Industry Scale Battery Storage Systems in a Sector Coupling Environment.	Dr. Holger Hesse	Technische Universität München
24.03./17:40	2C	Ageing of PV Home Storage Systems based on High-Resolution Field Measurements	M.Sc. Jan Figgener	ISEA, RWTH Aachen University
25.03./13:00	3A	Solvent-Free Preparation Of Sulfide Electrolyte Based Solid-State Batteries	Dr. Felix Hippauf	Fraunhofer Institute for Material and Beam Technology
25.03./13:30	3A	Prospects of all-solid-state sodium batteries operated at room temperature	Laura Goodwin	Justus-Liebig-Universität Gießen
25.03./13:50	3A	Comparing Lithiation and Sodiation of a Hard Carbon Anode Using In Situ Impedance Spectroscopy	Fabian Linsenmann	Technische Universität München
25.03./14:10	3A	Origin of Capacity Fade of pure layered P2-NaxMnyNi1-yO2 Cathode Materials with Controlled Particle Architecture	M.Sc. Lukas Schick	Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)
25.03./14:30	3A	Solid-State Lithium-Sulfur Battery enabled by Polymer-In-Ceramic Composite Electrolytes	Meirong Li	University Münster
25.03./13:00	3B	Fully continuous processing of LIB electrode slurries: a highly versatile and cost-effective manufacturing method	Dr. Philipp Stoessel	Bühler AG
25.03./13:30	3B	Potentials towards efficient recycling of valuable metals from spent Li ion batteries	Dr. Elsayed Mousa	Swerim AB
25.03./13:50	3B	Microstructural defects in Li-ion batteries and their detection with imaging techniques as a tool for process development and quality evaluation	Andreas Kopp	Hochschule Aalen
25.03./14:10	3B	A Joining Aspect in the Battery Production – Ultrasonic Welding of Thin Metal Sheets	Houssin Wehbe	TU Braunschweig, Institut für Füge- und Schweißtechnik
25.03./14:30	3B	Cyber-physical system based data mining in battery production for multi-criterial quality prediction	Artem Turetskyy	TU Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik
25.03./13:00	3C	Controlling module pressure evolution over lifetime with buffer layers: Design guidelines, prediction and validation for automotive systems	Severin Hahn	Daimler AG
25.03./13:30	3C	Thermal runaway initiation and propagation in commercial automotive lithium-ion cells and modules	Andreas Podias	European Commission
25.03./13:50	3C	Dynamic Electrochemical Impedance Spectroscopy as a versatile tool for battery characterization and diagnosis	Hendrik Zappen	ISEA RWTH Aachen / Safion GmbH
25.03./14:10	3C	Mixed Ageing Modelling of Lithium Ion Batteries	M. Sc. Felix Hildenbrand	RWTH Aachen University
25.03./14:30	3C	(Dis-) Advantages of different system connections and the importance of cross-connectors in serial and parallel connected systems.	Markus Schindler	Technical University Munich
25.03./15:40	4A	Mechanical characterization of the cathode active layer in lithium-ion batteries	Priyank Gupta	KTH Royal Institute of Technology
25.03./16:10	4A	Novel electrolyte with super high ionic conductivity for LIB	Dr. Naoki Matsuoka	Asahi Kasei Corporation
25.03./16:30	4A	How to design better cells to improve performance and extend lifetime	Ryan Prosser	Imperial College London
25.03./16:50	4A	Impact of the crystalline Li15Si4 phase on the self-discharge mechanism of silicon negative electrodes in organic electrolytes	Peer Bärmann	Münster Electrochemical Energy Technology
25.03./17:10	4A	Energy density and lifetime limitations of layered oxides (LiMeO2, Me = Co, Ni, Mn)	Dr. Karin Kleiner	Westfälische Wilhelms-Universität
25.03./15:40	4B	Formation - a critical production step for cell quality?	Dr. Philip Niehoff	MEET Batterieforschungszentrum, Universität Münster
25.03./16:10	4B	Production Research as Key Factor for Successful Implementation of Battery Production in Germany on the Example of Up-Scaling Nickel-Rich NMCs Electrodes	Dr Miriam Keppeler	Zentrum für Sonnenenergie-und Wasserstoff- Forschung Baden-Württemberg (ZSW)
25.03./16:30	4B	Quality assurance in lithium-ion battery manufacturing using X-ray computed tomography	Dr.-Ing Pascal Pinter	Volume Graphics GmbH
25.03./16:50	4B	Extrusion-based Slot-die Coating of Electrodes for High-Capacity Li-Ion Batteries	Sebastian Reuber	Fraunhofer IKTS
25.03./17:10	4B	At the pulse of electro mobility: Contacting battery cells using a nanosecond-pulsed laser welding process	Elie Haddad	Fraunhofer Institut für Lasertechnik
25.03./15:40	4C	New Insights in gas pressure evolution in Lithium-Ion Batteries containing layered Ni-rich cathodes	Philipp Teichert	Volkwagen AG
25.03./16:10	4C	Influence of path dependency on the state of health of Lithium-Ion batteries in electric vehicles	Trishna Raj	University of Oxford
25.03./16:30	4C	Improved SOC and SOH estimators by considering the effect of rest periods analyzed with half-cell data	Mikel Arrinda	CIDETEC Energy Storage
25.03./16:50	4C	Fast-charging in practice – a way to get it done!	Dr. Michael Schönleber	Batemo GmbH
25.03./17:10	4C	New insights into the capacity fading mechanisms of lithium ion batteries - Investigation of transition metal oxidation states in electrolytes by means of capillary electrophoresis	Lenard Hanf	MEET Battery Research Center
24.03./10:30	Keynote 1	A research factory for battery cell production – developing a suitable infrastucture	Prof. Dr. Jens Tübke	Das Fraunhofer-Institut für Chemische Technologie
24.03./11:05	Keynote 2	An unavoidable challenge for Ni-rich positive electrode materials for lithium-ion batteries	Prof. Jeff Dahn	Dalhousie University
24.3.2/11:40	Keynote 3	Towards cost and CO2 friendly value chains for lithium-ion cell production	Dr. Christoph Theis	P3 automotive GmbH
25.03./9:00	Keynote 4	Research needs for a sustainable EV Li-Battery Recycling	Prof. Dr.-Ing. Dr. h.c. Bernd Friedrich	IME Metallurgische Prozesstechnik und Metallrecycling Institut und Lehrstuhl der RWTH Aachen
25.03./9:35	Keynote 5	From materials research to sensing approaches for better batteries	Prof. Dr. Jean-Marie Tarascon	College de France
25.03./10:10	Keynote 6	Advanced next generation lithium battery and beyond	Dr. Khalil Amine	Argonne National Laboratory
25.03./10:45	Keynote 7	Development of electrolyte for lithium ion battery	Iwao Soga	Mitsubishi Chemical Corporation

1. Parallelsessions

Vortrag
24.3.2020 Session 1A 13:50 Uhr Dr. Peter Axmann Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW) Pure Silicon based Li-Ion-Cell with innovative 3D-Electrodes and porous cell architecture for Pre-Lithiation and Formation of a stacked Multilayer Cell
24.03.2020 Session 1A 14:20 Uhr Dr.-Ing. Vassilios Siozios MEET - Münster Electrochemical Energy Technology, WWU Münster Influence of Nickel Content on the Electrochemical Performance and Safety of Ni-Rich Cathode Materials Synthesized by Couette–Taylor Flow Reactor
24.03.2020 Session 1A 14:40 Uhr Joanna Komorowska Aalen University Composite electroforming as a production process for novel, structured and additive-free electrodes for Li-Ion-batteries
24.03.2020 Session 1A 15:00 Uhr Dr. Ruben-Simon Kühnel Empa Stabilizing Capacity Retention in NMC811/Graphite Full Cells via TMSPi Electrolyte Additives
24.03.2020 Session 1A 15:20 Uhr Dr. Mareike Wolter Fraunhofer-Institut für Keramische Technologien und Systeme IKTS New flexible and cost efficient bipolar battery concept for Lithium and Nickel-Iron chemistry
24.03.2020 Session 1B 13:50 Uhr Prof. Dr. Maria Kateri RWTH Aachen University Statistical methodology for evaluating capacity degradation and lifetime of batteries based on aging tests
24.03.2020 Session 1B 14:20 Uhr Sam Greenbank University of Oxford Predicting the onset of rapid battery degradation using data-drive approaches
24.03.2020 Session 1B 14:40 Uhr M. Sc. Weihan Li Institut für Stromrichter und elektrische Antriebe (ISEA), RWTH Aachen Battery Cloud: Data-Powered Intelligent Battery Management for Mobile and Stationary Battery Systems
24.03.2020 Session 1B 15:00 Uhr Dr. Markus Hagen Fraunhofer ICT Accelerating Science – Software based Data Evaluation and Organisation
24/03/2020 Session 1B 15:20 Uhr Stephan Bihn RWTH Aachen University Different Methods for Physically Motivated Parameterization of High Power Lithium-Ion Battery Cells over
24.03.2020 Session 1C 13:50 Uhr Prof. Dr. Wolfgang Bessler Hochschule Offenburg Quantification of lithium plating with a validated physicochemical model
24.03.2020 Session 1C 14:20 Uhr Dipl.-Ing. Christiane Essl Virtual Vehicle Research GmbH First and second degassing of automotive Lithium-Ion batteries at overtemperature experiments
24.03.2020 Session 1C 14:40 Uhr Dr. Alastair Hales Imperial College London The Cell Cooling Coefficient: A Standard to Define Heat Rejection from Lithium-Ion Batteries
24.03.2020 Session 1C 15:00 Uhr Christopher Olk Institut für Stromrichtertechnik und Elektrische Antriebe, RWTH Aachen Charging Station Deployment and Usage in Germany and around the World
24.03.2020 Session 1C 15:20 Uhr Dipl.-Ing. Lutz Morawietz Institute of Automotive Mechatronics GmbH Advanced cycle analysis as an integral part of the damage estimation of lithium-ion batteries in real vehicle applications
24.03.2020 Session 2A 16:30 Uhr Dr.rer.nat. Thomas Waldmann Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW) GD-OES Depth Profiling – A valuable new Technique to Study Aging Effects in Li-ion Cells
24.03.2020 Session 2A 17:00 Uhr Anna Weichert MEET Battery Research Center Optimization of Electrode Processing and Electrochemical Performance of LiFePO4 Based Electrodes for Stationary Energy Storage Applications
24.03.2020 Session 2A 17:20 Uhr Dr. Gebrekidan Gebresilassie Eshetu RWTH Designer Electrolyte Additive Enabled High-Performance NMC622/Silicon-Graphite Pouch Cells
24.03.2020 Session 2A 17:40 Uhr Dieter Oehler Karlsruhe Institute of Technology (KIT) Investigation of the influence of varying structure and material parameters on the effective thermal conductivity of porous electrodes
24.03.2020 Session 2B 16:30 Uhr Bastian Hartmann Ford Batteries in A 48V system – requirements and challenges
24.03.2020 Session 2B 17:00 Uhr Dr. Michael Stapelbroek FEV Europe GmbH 48V batteries, technical solutions to meet OEM requirements
24.03.2020 Session 2B 17:20 Uhr Christoph Fehrenbacher A123 48V cell and pack development – the supplier view
24.03.2020 Session 2C 16:30 Uhr Prof. Dr.-Ing. habil. Harry Hoster Lancaster University Extended warranty for battery systems: forging a probabilistic view on battery degradation
24.03.2020 Session 2C 17:00 Uhr M.Sc. Daniel Kucevic Technical University of Munich Technical Analysis of Peak Shaving and Load Smoothing in a Distribution Grid with Battery Energy Storage Systems
24.03.2020 Session 2C 17:20 Uhr Dr. Holger Hesse Technische Universität München Techno-Economic Optimization of Residential and Industry Scale Battery Storage Systems in a Sector Coupling Environment.
24.03.2020 Session 2C 17:40 Uhr M.Sc. Jan Figgener ISEA, RWTH Aachen University Ageing of PV Home Storage Systems based on High-Resolution Field Measurements
25.03.2020 Session 3A 13:00 Uhr Dr. Felix Hippauf Fraunhofer Institute for Material and Beam Technology Solvent-Free Preparation Of Sulfide Electrolyte Based Solid-State Batteries
25.03.2020 Session 3A 13:30 Uhr Laura Goodwin Justus-Liebig-Universität Gießen Prospects of all-solid-state sodium batteries operated at room temperature
25.03.2020 Session 3A 13:50 Uhr Fabian Linsenmann Technische Universität München Comparing Lithiation and Sodiation of a Hard Carbon Anode Using In Situ Impedance Spectroscopy
25.03.2020 Session 3A 14:10 Uhr M.Sc. Lukas Schick Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW) Origin of Capacity Fade of pure layered P2-NaxMnyNi1-yO2 Cathode Materials with Controlled Particle Architecture
25.03.2020 Session 3A 14:30 Uhr Meirong Li University Münster Solid-State Lithium-Sulfur Battery enabled by Polymer-In-Ceramic Composite Electrolytes
25.03.2020 Session 3B 13:00 Uhr Dr. Philipp Stoessel Bühler AG Fully continuous processing of LIB electrode slurries: a highly versatile and cost-effective manufacturing method
25.03.2020 Session 3B 13:30 Uhr Dr. Elsayed Mousa Swerim AB Potentials towards efficient recycling of valuable metals from spent Li ion batteries
25.03.2020 Session 3B 13:50 Uhr Andreas Kopp Hochschule Aalen Microstructural defects in Li-ion batteries and their detection with imaging techniques as a tool for process development and quality evaluation
25.03.2020 Session 3B 14:10 Uhr Houssin Wehbe TU Braunschweig, Institut für Füge- und Schweißtechnik A Joining Aspect in the Battery Production – Ultrasonic Welding of Thin Metal Sheets
25.03.2020 Session 3B 14:30 Uhr Artem Turetskyy TU Braunschweig, Institut für Werkzeugmaschinen und Fertigungstechnik Cyber-physical system based data mining in battery production for multi-criterial quality prediction
25.03.2020 Session 3C 13:00 Uhr Severin Hahn Daimler AG Controlling module pressure evolution over lifetime with buffer layers: Design guidelines, prediction and validation for automotive systems
25.03.2020 Session 3C 13:30 Uhr Andreas Podias European Commission Thermal runaway initiation and propagation in commercial automotive lithium-ion cells and modules
25.03.2020 Session 3C 13:50 Uhr Hendrik Zappen ISEA RWTH Aachen / Safion GmbH Dynamic Electrochemical Impedance Spectroscopy as a versatile tool for battery characterization and diagnosis
25.03.2020 Session 3C 14:10 Uhr M. Sc. Felix Hildenbrand RWTH Aachen University Mixed Ageing Modelling of Lithium Ion Batteries
25.03.2020 Session 3C 14:30 Uhr Markus Schindler Technical University Munich (Dis-) Advantages of different system connections and the importance of cross-connectors in serial and parallel connected systems.
25.03.2020 Session 4A 15:40 Uhr Priyank Gupta KTH Royal Institute of Technology Mechanical characterization of the cathode active layer in lithium-ion batteries
25.03.2020 Session 4A 16:10 Uhr Dr. Naoki Matsuoka Asahi Kasei Corporation Novel electrolyte with super high ionic conductivity for LIB
25.03.2020 Session 4A 16:30 Uhr Ryan Prosser Imperial College London How to design better cells to improve performance and extend lifetime
25.03.2020 Session 4A 16:50 Uhr Peer Bärmann Münster Electrochemical Energy Technology Impact of the crystalline Li15Si4 phase on the self-discharge mechanism of silicon negative electrodes in organic electrolytes
25.03.2020 Session 4A 17:10 Uhr Dr. Karin Kleiner Westfälische Wilhelms-Universität Energy density and lifetime limitations of layered oxides (LiMeO2, Me = Co, Ni, Mn)
25.03.2020 Session 4B 15:40 Uhr Dr. Philip Niehoff MEET Batterieforschungszentrum, Universität Münster Formation - a critical production step for cell quality?
25.03.2020 Session 4B 16:10 Uhr Dr Miriam Keppeler Zentrum für Sonnenenergie-und Wasserstoff- Forschung Baden-Württemberg (ZSW) Production Research as Key Factor for Successful Implementation of Battery Production in Germany on the Example of Up-Scaling Nickel-Rich NMCs Electrodes
25.03.2020 Session 4B 16:30 Uhr Dr.-Ing Pascal Pinter Volume Graphics GmbH Quality assurance in lithium-ion battery manufacturing using X-ray computed tomography
25.03.2020 Session 4B 16:50 Uhr Sebastian Reuber Fraunhofer IKTS Extrusion-based Slot-die Coating of Electrodes for High-Capacity Li-Ion Batteries
25.03.2020 Session 4B 17:10 Uhr Elie Haddad Fraunhofer Institut für Lasertechnik At the pulse of electro mobility: Contacting battery cells using a nanosecond-pulsed laser welding process
25.03.2020 Session 4C 15:40 Uhr Philipp Teichert Volkwagen AG New Insights in gas pressure evolution in Lithium-Ion Batteries containing layered Ni-rich cathodes
25.03.2020 Session 4C 16:10 Uhr Trishna Raj University of Oxford Influence of path dependency on the state of health of Lithium-Ion batteries in electric vehicles
25.03.2020 Session 4C 16:30 Uhr Mikel Arrinda CIDETEC Energy Storage Improved SOC and SOH estimators by considering the effect of rest periods analyzed with half-cell data
25.03.2020 Session 4C 16:50 Uhr Dr. Michael Schönleber Batemo GmbH Fast-charging in practice – a way to get it done!
25.03.2020 Session 4C 17:10 Uhr Lenard Hanf MEET Battery Research Center New insights into the capacity fading mechanisms of lithium ion batteries - Investigation of transition metal oxidation states in electrolytes by means of capillary electrophoresis

2. Posterausstellung

Poster	Titel	Autor	Firma
P1-01		Dr. rer. nat. Susanne Dörfler Co-Autoren: B. Schumm, T. Abendroth, H. Althues, S. Kaskel	Fraunhofer IWS
P1-02	Interphasial and Thermal Reactivity Investigation of Silicon-Graphite Composite Anode Electrodes	M. Sc. Felix Aupperle	Helmholtz Institut Münster
P1-03	Intensive powder pretreatment for a solvent-free production of lithium-ion battery cathodes by hotpressing	Gerrit Schälicke	Technische Universität Braunschweig
P1-04	Effect of the concentration of different conductive additives and binder on processing and properties of lithium-ion battery cathodes	Julian Mayer Co-Autoren: Dr.-Ing. Wolfgang Haselrieder, Prof. Dr.-Ing. Arno Kwade	Institut für Partikeltechnik
P1-05	Morphology Study of the SEI Layer in Lithium-Ion Batteries under Plating Conditions	Julian Marscheider	Technische Universität Berlin
P1-06	Characterisation of Li-Ion Batteries by Correlative EDS, SIMS, Light-, Raman-, Ion- and Electron Microscopy	Dr. Ute Golla-Schindler Co-Autoren: L. Han, P. Gnauck, F. Khanom, F. Perez-Willard, T. Bernthaler and G. Schneider	Hochschule Aalen
P1-07	Detailed electrochemical characterization of LLZO grain and grain boundary resistance and LLZO/Lithium interface resistance	André Weber Co-Autoren: Sebastian Dierickx, Marius Müller, Johannes Schmieg, Michael Weiss, Dagmar Gerthsen, Ellen Ivers-Tiffée	Karlsruhe Institute of Technology (KIT)
P1-08	Li/Mn-rich layered transition-metal oxides with low cobalt content as core-shell particles for high-energy cathodes	Jonathan Helbig Co-Autoren: Richard Schmuch, Verena Naber, Martin Winter, Tobias Placke	MEET - Münster Electrochemical Energy Technology, WWU Münster
P1-09	Role of the binder in electrode performance with Adiponitrile-based electrolytes	Niloofar Ehteshami-Flammer Co-Autoren: Diogo Vieira Carvalho, Arianna Moretti, Stefano Passerini, Martin Winter, Elie Paillard	Forschungszentrum Jülich (IEK-12)
P1-10	Effect of polymeric binders on mechanical integrity and conductivity of water-based electrodes and its correlation to the electrochemical behavior of Li-ion cells	Ronald Gordon Co-Autoren: Norbert Willenbacher	Karlsruhe Institute of Technology (KIT)
P1-11	Effect of infrared post-drying and moisture of cell components on structural properties and electrochemical performance of lithium-ion batteries	Fabienne Huttner Co-Autoren: Wolfgang Haselrieder, Arno Kwade
P1-12	Dual Salt Solid Polymer Electrolyte for Lithium Metal Battery via In Situ Polymerization Process	Ishamol Shajji Co-Autoren: Niloofar Ehteshami, Diddo Diddens, Andreas Heuer, Martin Winter, Jijeesh Ravi Nair
P1-13	Chemical Intercalation of Li Metal in Si/C composite Anodes - An operando Neutron Scattering Study	Karsten Richter Co-Autoren: Thomas Waldmann, Neelima Paul, Nicola Jobst, Christin Hogrefe, Rares-George Scurtu, Michael Hofmann, Ralph Gilles, Margret Wohlfahrt-Mehrens	Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW)
P1-14	Process quality relationships of the formation result of lithium-ion batteries	Louisa Hoffmann	Technische Universität Braunschweig
P1-15	Optimization of Silicon-Graphite Anode and Polymeric Binder Material for Lithium-ion Batteries	Niloofar Hamzelui Co-Autoren: Gebrekidan Gebresilassie Eshetu, Max Linhorst, Rita Weyer, Bruno Moerschbacher, Egbert Figgemeier
P1-16	Influence of binder on the structure and performance of anodes	René Jagau Co-Autoren: Fabienne Huttner; Wolfgang Haselrieder; Arno Kwade
P1-17	Polymerized Ionic Liquids for Lithium Conducting Membranes	Robert Löwe Co-Autoren: Thomas Hanemann, Andreas Hofmann	Karlsruhe Institute of Technology
P1-18	Solvent-free Processing of Solid State Electrodes Based On A Plastic Crystal Electrolyte System	Arnaud du Baret de Limé Co-Autoren: Matthias Coeler, Vanessa van Laack (FhG-IFAM), Sebastian Reuber, Katharina Koschek (FhG-IFAM), Mareike Wolter, Alexander Michaelis	Fraunhofer IKTS
P1-19	Aging effects of batteries to include in battery models for higher accuracy	Christiane Rahe Co-Autoren: Dirk Uwe Sauer, Egbert Figgemeier	Forschungszentrum Jülich
P1-20	Towards 3D-Printed Microbatteries Based on Silicon/Carbon Graphite Blend Anodes	M.Sc. Mathias Drews Co-Autoren: Peter Haberzettl, Sebastian Tepner, Harald Gentischer, Daniel Biro and Roland Zengerle	Fraunhofer ISE
P1-21	Deactivation of electrodes due to dense covering layer formation caused by long-term cycling and storage	Dr. Meinert Lewerenz Co-Autoren: Christiane Rahe, Christian Endisch, Dirk Uwe Sauer	Technische Hochschule Ingolstadt
P1-22	The Influence of Cell Design on the SEI	Bastian Heidrich Co-Autoren: P. Niehoff, M. Börner, M. Winter	Westfälische Wilhelms-Universität Münster
P1-24	Investigation of the Influence of Compression of the Cell on Capacity Fade and Homogeneity of Lithium Distribution	Dr. Meinert Lewerenz Co-Autoren: Christiane Rahe, Christian Endisch, Dirk Uwe Sauer	Technische Hochschule Ingolstadt
P1-25	Application of Kelvin Probe Force microscopy for analysis of barriers for charge transport in solid and hybrid electrolytes	Dr. Kerstin Neuhaus Co-Autoren: Annika Buchheit, Marija Hoffmeyer, Britta Teßmer, Hans-Dieter Wiemhöfer	Westfälische Wilhelms-Universität Münster
P1-26	ON OPTIMAL CHARGING METHODS TO SUPPRESS MECHANICAL DEGRADATION OF SILICON COMPOSITE ELECTRODES	Professor Junqian Zhang	Shanghai University
P1-27	Understanding interfacial challenges in solid-state batteries	Philip Minnmann Co-Autoren: Felix Walther, Raimund Koerver, Felix Richter, Wolfgang G. Zeier, Jürgen Janek	Justus-Liebig-Universität Gießen
P1-28	Optical in-situ observation of lithium-ion-battery electrodes for material characterization	Dr. Florian Rittweger Co-Autoren: Dr. Christian Modrzynski, Dr. Valentin Roscher, Prof. Dr.-Ing. Karl-Ragmar Riemschneider	University of Applied Sciences Hamburg
P1-30	Thin film LiMn2O4 as model for interface studies and enabling Li2Mn2O4 in particle systems	Dr. Theodoor Anton Hendriks Co-Autoren: D.M. Cunha, X. Hou, D.P. Singh, J. Li, M. Huijben	Forschungszentrum Jülich GmbH, Helmholtz-Institute Münster
P1-31	Theoretical investigation of lithium diffusivity in advanced lithium-ion battery materials	Stephane Brice Olouou Guifo	Volkswagen AG
P1-32	Model based parametrization of advanced fast charging procedures for lithium-ion batteries	Benjamin Hauck Co-Autoren: M. Dippon, A. Weber, E. Ivers-Tiffée	Karlsruher Institut für Technologie (KIT)
P1-33	On the Reaction Mechanisms of Li with Graphite Electrodes	M.Sc. Christin Hogrefe Co-Autoren: Thomas Waldmann, Karsten Richter, Margret Wohlfahrt-Mehrens	ZSW ? Zentrum für Sonnenenergie- und Wasserstoff-Forschung, Baden-Württemberg
P1-34	FEM based modelling of lamellar LiFePO4 electrodes	Robert Franke-Lang Co-Autoren: Julia Kowal	Technische Universität Berlin
P1-35	Structure and Electrochemistry of Superionic Thiophosphate- and Sulfide-based Lithium Solid Electrolytes	Maximilian Plaß Co-Autoren: Christian Schneider, Anna-Katharina Hatz, Sascha Harm, Igor Moudrakovski, Luzia S. German, Roland Eger, Robert E. Dinnebier, Bettina V. Lotsch	Max-Planck-Institut für Festkörperforschung
P1-36	Optimizing all solid battery performance to reduce cell degradation	Simon Randau Co-Autoren: Yannik Schneider, Felix Walther, Rajendra Negi, Felix H. Richter, Jürgen Janek	Institute of Physical Chemistry & Center for Materials Research (ZFM)
P1-37	Transient Measurement of Heat Generation in Lithium-ion Cells	Mr Gavin White Co-Autoren: Alastair Hales, Yatish Patel, Gregory Offer	Imperial College London
P1-38	Coating on Silicon and its effect on energy density: a model study	Simone Casino Co-Autoren: Dr. Philip Niehoff, Dr Markus Boerner, Prof. Martin Winter	Westfälische Wilhelms-Universität
P1-39	Introduction of Evaluation Method for Contact Resistance (Interface Resistance) Between Composite and Current Collector in Lithium Ion Battery Electrode Sheet	Yuki Kawamuro Co-Autoren: Nobuhisa Handa, Makoto Kori, Tetsuya Takahashi	HIOKI E.E. CORPORATION
P1-40	Synthesis of Porous Silicon Thin Film Anodes by Vapor Phase Dealloying	Dr. Stefan Saager Co-Autoren: Bert Scheffel, Olaf Zywitzki, Thomas Modes, Christoph Metzner	Fraunhofer-Institut für Organische Elektronik, Elektronenstrahl- und Plasmatechnik FEP
P1-41	Understanding the Effect of Nb Substitution on Li-Mn-Rich Layered Oxides	Jan-Paul Brinkmann Co-Autoren: Vassilios Siozios, Uta Rodehorst, Jun Wang, Martin Winter, Jie Li	Forschungszentrum Jülich GmbH
P1-42	Continuous Suspension Production: Influencing electrode properties by knowledge driven extrusion process design	Matthias Haarmann Co-Autoren: Wolfgang Haselrieder, Arno Kwade	Technische Universität Braunschweig
P1-43	Investigation on the safety of the battery cell by developing the simulation models of mechanical and thermal abuse tests	Muhammad Ammad Raza Siddiqui Co-Autoren: Shraddha Suhas Kulkarni, Filip Vysoudil, Jan-Aut Deeken, Prof. Dr.-Ing. Thomas Vietor	Institute for Engineering Design, Technical University of Braunschweig
P1-44	Modelling of Interfacial Resistances for All-Solid-State Battery Cells	Maximilian Scheller Co-Autoren: Andreas Jossen	Technische Universität München
P1-45	Investigation of capacity fade mechanisms and modeling for lithium ion batteries cycled under different state of charge ranges	Dr. Jiangong Zhu Co-Autoren: Dr. Michael Knapp,Dr. Michael Heere,Dr. Daniel R. Sørensen,Dr. Mariyam Susana Dewi Darma,Prof.Haifeng Dai, Prof.Xuezhe Wei, Prof.Helmut Ehrenberg	Institute of Applied Materials (IAM), Karlsruhe Institute of Technology (KIT)
P1-46	Fiber Optical Cell State Monitoring of Anode and Cathode	Dr. Christian Modrzynski	Hochschule für Angewandte Wissenschaften Hamburg
P1-47	Non-invasive investigation of ageing processes with impedance spectra of high power batteries	Gereon Stahl Co-Autoren: Dirk Uwe Sauer	RWTH Aachen
P1-48	Empirical lifetime modelling based on a design-of-experiment aging test with automotive grade lithium-ion pouch cells	Jochen Stadler Co-Autoren: Carsten Krupp, Jochen Bandlow, Madeleine Ecker, Arnulf Latz	Daimler AG
P1-49	Lithium ion conducting solid electrolytes Li3PS4-Li3PO4 prepared by mechanical milling	Xianlin Luo Co-Autoren: Sylvio Indris and Helmut Ehrenberg	Karlsruhe Institute of Technology (KIT)
P1-50	Opportunities for Advanced 3D and 4D Microstructural Characterization of Batteries and Battery Materials	Robin White	Carl Zeiss Microscopy
P1-51	Illuminating catalytic species during the thermal runaway of lithium ion batteries	Florian Baakes Co-Autoren: Fridolin Röder, Ulrike Krewer	Institut für Energie- und Systemverfahrenstechnik
P1-52	A Comparative Cathode Study of an Over-Lithiated and Manganese-Rich HE-NCM with NCA in Multi-Layer Li-Ion Pouch Cells	Tanja Zünd Co-Autoren: Ludwig Kraft (Institute for Electrical Energy Storage Technology), David Schreiner (Institute for Machine Tools and Industrial Management), Franziska Friedrich (Chair of Technical Electrochemistry), Gunther Reinhart (Institute for Machine Tools and Industrial Management), Andreas Jossen (Institute for Electrical Energy Storage Technology), Hubert A. Gasteiger (Chair of Technical Electrochemistry)	Technische Universität München (TUM)
P1-53	Upscaling of mechanochemical syntheses of sulfidic solid electrolytes	Moritz Hofer Co-Autoren: Michael Grube, Sabrina Zellmer, Peter Michalowski, Arno Kwade	Technische Universität Braunschweig, Institute for Particle Technology
P1-54	Silicon-Nitride Materials for Improved Stability of Anodes for Next Generation Li-ion Batteries	Dr Carl Erik Foss Co-Autoren: Asbjørn Ulvestad, Preben J. Vie, Alexey Y. Koposov, Embla T. Bø, Hanne F. Andersen, Per Erik Vullum and Jan Petter Mæhlen	Institute for Energy Technology
P1-55	A mechanistic understanding of lithium ion transport in ternary ionic liquid electrolytes	M.Sc. Alina Wettstein	Westfälische Wilhelms-Universität Münster
P1-56	Insights in Structure and Dynamics of PEO – LiTFSI Electrolytes near Graphene Electrodes from Molecular Dynamics Simulations	Andreas Thum Co-Autoren: Diddo Diddens, Andreas Heuer	University of Münster
P1-57	Silicon nanoparticles with a graphene shell as anodes for Lithium Ion Batteries: study of the role of graphene to silicon ratio	Mr Dimitrios Panagiotis Argyropoulos Co-Autoren: Panagiotis Giotakos, Maria Daletou, Filippos Farmakis	Democritus University of Thrace
P1-58	Investigation and evaluation of active material blends in high-energy anodes	M.Sc. Laura Gottschalk Co-Autoren: N.Strzelczyk; S. Sachse; W. Haselrieder; A. Kwade	Technische Universität Braunschweig
P1-59	Structural and electrochemical characterization of polymer based all-solid-state cathodes manufactured by a scalable process chain	Laura Helmers Co-Autoren: Linus Froböse, Peter Michalowski, Arno Kwade	TU Braunschweig
P1-60	Preparation of silicon-carbon composites by fluidized bed granulation	M.Sc. Jannes Müller	TU Braunschweig
P1-61	Aging Characterization and Modeling of a Lithium Titanate Oxide-based cell	Fabian Meishner Co-Autoren: Cem Ünlübayir, Thomas Nemeth, Dirk Uwe Sauer	RWTH Aachen University
P1-62	Study of transition metal dissolution and subsequent deposition in lithium ion batteries by means of surface sensitive techniques	Patrick Harte Co-Autoren: Martin Winter, Sascha Nowak	Westfälische Wilhelms-Universität
P1-63	Investigation of Electronical Contact Loss in Lithium Ion Battery Cathodes by ICP-OES	Till-Niklas Kröger Co-Autoren: Simon Wiemers-Meyer, Martin Winter, Sascha Nowak	Westfälische Wilhelms-Universität Münster
P1-64	Characterization of the cathode current collector using confocal and ion and electron microscopy	Jan Niedermeier Co-Autoren: Andreas Kopp (Aalen University, KIT), Benjamin Bold (KIT), Timo Bernthaler (Aalen University), Gerhard Schneider (Aalen University)	Aalen University
P1-65	LIB cell production with alternative binder and intrinsic conductive polymers	Dr. Helene Jeske Co-Autoren: Maja Kandula, Sabine Ernst* and Klaus Dilger* Institute of Joining and Welding, TU Braunschweig, Langer Kamp 8, 38106 Braunschweig, Germany *Institute of Environmental and Sustainable Chemistry, Hagenring 30, 38106 Braunschweig, Germany	TU Braunschweig, Institut für Füge- und Schweißtechnik
P1-66	Upscaling and solvent stability of the fast LGPS-like solid electrolyte Li7SiPS8	Anna-Katharina Hatz Co-Autoren: Palanivel Molaiyan, Sascha Harm, Robert Calaminus, Fiona Treber, Nella Vargas-Barbosa, Peter Michalowski, Arno Kwade, Bettina V. Lotsch	Max Planck Institute for Solid State Research
P1-67	Development of a powder bed generation process as a basis for the additive manufacturing of three-dimensionally structured thick all-solid-state cathodes	Jan-Aut Deeken	Technische Universität Braunschweig
P1-68	Li-ion Batteries studied with Correlative Scanning Electron Microscopy and Secondary Ion Mass Spectrometry	Gudrun Wilhelm Co-Autoren: Ute Golla-Schindler, Hubert Schulz, Timo Bernthaler, Gerhard Schneider	Hochschule Aalen
P1-69	New developments in the characterisation of all-solid state battery composite cathodes	Dr Henry Auer Co-Autoren: Juliane Hüttl, Kristian Nikolowski, Mareike Wolter	Fraunhofer IKTS
P1-70	Why high-precision coulometry requires thermal baths?	Dr. Alana Zülke Co-Autoren: Yi Li, Peter Keil, Harry Hoster	Lancaster University
P1-71	Investigating the Li ion mobility in the Li10GeP2S5 solid electrolyte using multidimensional correlation NMR	Josef Granwehr Co-Autoren: M.C. Paulus, P. Heitjans, R.-A. Eichel, S. Merz	Forschungszentrum Jülich and RWTH Aachen
P1-72	Analytical Transmission Electron Microscopy studies of LiNi0.6Mn0.2Co0.2O2, LiCoO2, and silicon electrode materials for lithium-ion batteries	Ardavan Makvandi Co-Autoren: Dr. Martin Peterlechner, Simone Casino, Dr. Tobias Gallasch, Prof. Dr. Martin Winter, and Prof. Dr. Gerhard Wilde	Institute of Materials Physics, University of Münster
P1-73	Patterns of Charge and Discharge: How they Influence the Homogeneity of Lithium Distribution in Cells with Silicon/Graphite Anodes and their Ageing	Mr Robert Burrell Co-Autoren: Alana Zulke, Peter Keil, Harry Hoster	Lancaster University
P1-74	Measurement of Li-ion mobility in electrolytes and separators	Ingo Reuter Co-Autoren: Thomas Hanemann, Andreas Hofmann	Karlsruher Institut für Technologie
P1-76	Tailoring solution synthesis of thiophosphate solid electrolytes	Dr. Michael Ghidiu Co-Autoren: Wolfgang G. Zeier	Justus Liebig Universität Gießen
P2-01	Gas diffusion electrodes for metal-air systems: Impact of electrolyte characteristics and wettability behavior	Dr. Daniela Fenske Co-Autoren: Ricardo Sanchez-Aguirre, Julian Schwenzel	Fraunhofer-Institut for Manufacturing and Andvanced Materials IFAM
P2-03	Fundamental effect of surface decoration and thickness on the cycling stability of lithium metal electrodes	Dr. Marian Cristian Stan Co-Autoren: Aleksei Kolesnikov, Tobias Hering, Mengyi Zhang, Peter Maria Bieker, Martin Kolek, Martin Winter	Westfälische Wilhelms-Universität
P2-04	Scalability aspects of the zinc-ion battery technology: Upscaling of the copper hexacyanoferrate synthesis as cathode material, electrode processing and guidelines for proper cell design.	M.Sc. Alexander Gräfenstein Co-Autoren: D. Fenske, M. Piesnack, R. Meyer, J. Schwenzel	Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung IFAM
P2-05	Corrosion of lithium-powder based electrodes in liquid electrolyte	Aleksei Kolesnikov Co-Autoren: Martin Kolek, Jan Frederik Dohmann, Till Lukas Bongers, Asel Akhmetova, Peter Bieker, Martin Winter, Marian Cristian Stan	MEET - Münster Electrochemical Energy Technology, WWU Münster
P2-06	Oxidative Stability of MgxClyz+-Based Electrolytes for Mg Batteries – Variation of Stoichiometry and Solvents	Verena Küpers Co-Autoren: Dominik Weintz, Peter Bieker, Martin Winter, Martin Kolek	MEET - Münster Electrochemical Energy Technology, WWU Münster
P2-07	Improvement of Polymer Electrolytes via Molecular Simulations and Polymer Theory	Dr. Diddo Diddens Co-Autoren: Andreas Heuer, Len Kimms	Helmholtz Institute Münster (HI MS), Forschungszentrum Jülich
P2-08	Conditioning and Speciation of MgCl2/AlCl3-Based Electrolytes for Mg Batteries –A Stoichiometric Point-of-View	Martin Kolek Co-Autoren: Georg Bieker, Verena Küpers, Peter Bieker, Martin Winter	MEET - Münster Electrochemical Energy Technology, WWU Münster
P2-09	Impact of Different Cathode Materials on the Deposition/Dissolution Behavior and Morphology of Li Metal due to Cross Talk	Johannes Betz Co-Autoren: Jan-Paul Brinkmann, Laura Nowak, Roman Nölle, Constantin Lürenbaum, Martin Kolek, Marian Stan, Martin Winter, Tobias Placke	MEET - Münster Electrochemical Energy Technology, WWU Münster
P2-10	A Li-ion solvating pyrrolidinium cation for ionic liquid plasticized PEO-based electrolytes	Jaschar Atik Co-Autoren: Diddo Diddens, Johannes Thienenkamp, Martin Winter, Elie Paillard
P2-11	New insights into composite electroforming: pilot plant production of novel binder- and conducting carbon-free battery electrodes	A. Katharina Jäger Co-Autoren: Dr. Sandra Meinhard, Oliver Kesten, Iwetta Hägele, Joanna Komorowska, Anne Wengel, Arndt Borgmeier, Timo Sörgel	Aalen University, Research Institute for Innovative Surfaces (FINO)
P2-13	Investigation on heteroatomic redox polymers as cathode-active materials for rechargeable Li/organic batteries	Verena Perner	University of Münster
P2-14	Degradation of ionic liquid-based electrolytes at the current collector interface: Corrosion as a challenge for the application in Lithium/Oxygen cell chemistries	M. Sc. Jan Frederik Dohmann Co-Autoren: Y. Preibisch, V. Küpers, B. Krueger, F. Horsthemke, A. Kolesnikov, M. Zhang, M. Kolek, S. Nowak, M. Stan, G. Wittstock, M. Winter, P. Bieker	University of Münster
P2-15	Straight cell design as advantage of flow batteries	Jan Girschik Co-Autoren: Michael Joemann, Anna Grevé, Christian Doetsch	Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT
P2-16	Tuning the Chemical Structure of Single-Ion Conducting Polymer Electrolytes for Optimal Li+ Transport	Kristina Borzutzki Co-Autoren: Dengpan Dong, Christian Wölke, Margarita Kruteva, Annika Stellhorn, Martin Winter, Gunther Brunklaus, Dmitry Bedrov	Forschungszentrum Jülich (IEK-12)
P2-17	Comparison between carbon anodes in LiC-S full cells and metal anodes in metal/oxygen systems regarding ageing processes	Jan Petit Co-Autoren: Markus Hagen, Sophie Weixler, Martin Joos, Michael Abert, Jens Tübke	Fraunhofer Institute for Chemical Technology (ICT)
P2-18	Optimization of all-solid-state Li-S batteries	Georg Dewald Co-Autoren: Saneyuki Ohno, Jürgen Janek, Wolfgang G. Zeier	Physikalisch-Chemisches Institut, Justus-Liebig-Universität Gießen
P2-19	Energy Storage beyond Lithium - Challenges of Processing	Julian Klemens Co-Autoren: A. Altvater, S. Spiegel, Dr.-Ing. P. Scharfer, Prof. Dr.-Ing. W. Schabel	Karlsruher Institut für Technologie
P2-20	Choosing the right carbon is of vital importance for high performance Sb-based Na-ion batteries	Kristina Pfeifer Co-Autoren: Stefanie Arnold, Öznil Budak, Xianlin Luo, Volker Presser, Helmut Ehrenberg, Sonia Dsoke	Karlsruhe Institute of Technology
P2-21	In Situ Growth Tin Sulfide Nanosheets on Reduced Graphene Oxide as a High-Performance Anode for Potassium-Ion Batteries	Chengping Li Co-Autoren: A. Sarapulova, K. Pfeifer, H. Ehrenberg, S. Dsoke	Karlsruhe institute of Technology
P2-22	Magnesium Powder-Based Anodes for Magnesium Batteries	Nico-Dominik Kohlenbach Co-Autoren: Verena Küpers, Jan Frederik Dohmann, Peter Bieker, Martin Winter, Martin Kolek	Westfälische Wilhelms-Universität Münster
P2-23	Single-Ion Conducting Polymer Electrolytes for High-Energy Lithium Batteries	M.Sc. Alexander Mayer Co-Autoren: D. Steinle, H.-D. Nguyen, Z. Chen, E. Paillard, S. Passerini, C. Iojoiu, D. Bresser	Karlsruhe Institute of Technology (KIT)
P2-24	Pre-Treatment of Lithium Anodes for Lithium Metal Batteries	Julia Wellmann Co-Autoren: Elie Paillard	Forschungszentrum Jülich
P2-26	Electrochemical Alkali-Ion Exchange in Electrode Materials for Secondary Batteries	Tobias Lein Co-Autoren: C. Heubner, B. Matthey, M. Schneider, A. Michaelis	Fraunhofer IKTS Dresden
P2-27	Optimized Electrolytes for Lithium-Metal \|\| Nickel-Rich Cathode Batteries	Hannes Kühnle Co-Autoren: Gebrekidan Gebresilassie Eshetu, Egbert Figgemeier	ISEA / RWTH Aachen University
P2-28	Laser cutting processes of lithium metal foil for all-solid-state battery systems	Lars Oliver Schmidt	Institut für Füge- und Schweißtechnik, Technische Universität Braunschweig
P2-29	Determination and comparison of diffusion coefficients for Na-NiCl2 high temperature batteries by GITT measurements and impedance spectroscopy	Benjamin Schüßler Co-Autoren: K. Skadell, M. Schulz, M. Stelter	Fraunhofer IKTS
P2-30	Photo-Crosslinked Single-Ion Conducting Polymer Electrolytes for Lithium Metal Batteries	Hai-Peng Liang Co-Autoren: Zhen Chen, Dominic Bresser, and Stefano Passerini	Helmholtz Institute Ulm
P2-31	Investigations on the Native SEI on Lithium Metal through Scanning Electrochemical Microscopy	Felix Weber Co-Autoren: Egbert Figgemeier	Forschungszentrum Juelich GmbH
P2-32	Analytical Study and Comparison of Solid and Liquid Batteries For Electric Vehicles and Thermal Management Simulation?	Mr. M Faisal Jamal Khan Co-Autoren: Vaibhav Kumar Singh	University of Applied Sciences Ravensburg-Weingarten
P2-33	Medium-temperature sodium-iodine battery system	M.Sc. Frank Schäfer Co-Autoren: Michael Holzapfel, Thomas Berger and Jens Tübke	Fraunhofer-Institut für Chemische Technologie (ICT)
P2-34	DRT analysis of sodium and lithium insertion into hard carbon anodes	Srivatsan Ramasubramanian Co-Autoren: Hyein Moon, Ivana Hasa, Stefano Passerini, Olaf Böse, Michael A. Danzer, Magdalena Mandl	Helmholtz Institute Ulm
P2-35	Columnar Lithium Metal Anodes	Xue-Qiang Zhang Co-Autoren: Martin Winter, Peter Bieker, Qiang Zhang	Münster Electrochemical Energy Technology
P2-36	Challenges behind long-term cyclability of Intermediate Temperature Sodium Sulfur (IT-NaS) Battery	Dr Sathiyaraj Kandhasamy Co-Autoren: M.C.M. van de Sanden, M.Tsampas	Dutch Institute for Fundamental Energy Research (DIFFER)
P2-37	Effect of additional cations on the conductivity of solid polymer electrolytes for lithium metal batteries	Tjark Ingber Co-Autoren: Dominik Liebenau, Martin Kolek, Björn Wankmiller, Peter Bieker, Hans-Dieter Wiemhöfer, Martin Winter	University of Muenster
P2-38	Lithium Powder Composite Electrodes for All-Solid-State Li-Metal Batteries	Tobias Hering Co-Autoren: Aleksei Kolesnikov, Marian Cristian Stan, Peter Bieker, Martin Winter	Batterieforschungszentrum MEET, WWU Münster
P2-39	A Study of Practical Operating Challenges in Alkaline Electrolyte for Rechargeable Zinc-Air Batteries	Dr Wei Sun	University of Muenster
P2-40	Posterausstellung / Poster exhibition	Felix Gerbig	Karlsruhe Institute of Technology (KIT)
P2-41	Cathode Porosity and Catalytical Impact on Specific Discharge Capacity and Cycle Stability in 2D- Lithium-Air Battery Simulation	Dennis Meiling Co-Autoren: Julia Kowal	Technische Universität Berlin
P2-42	Advantages of energy storage system hybridization: an analytical methodology to find an optimal combination	Marc Möller Co-Autoren: Dr. Holger Hesse, Prof. Dr.-Ing. Andreas Jossen	Technische Universität München
P2-43	Improvement of capacity retention and coulombic efficiency of lithium sulfide cathodes for lithium-sulfur batteries	Sebastian Daniel Hirt Co-Autoren: S. Wennig, B. Oberschachtsiek, A. Heinzel	ZBT GmbH
P2-44	The Influence of Nitrile Additives in DMSO-based Electrolytes on Lithium/Oxygen Cells	Andreas Twyhues Co-Autoren: Mengyi Zhang, Jan Frederik Dohmann, Peter Bieker, Martin Winter	Batterieforschungszentrum MEET, Universität Münster
P2-45	Electrochemical Modelling of Sodium-ion batteries	Mr Kudakwashe Chayambuka Co-Autoren: G. Mulder, D.L. Danilov, P.H.L. Notten	Forschungszentrum Jülich
P2-46	Water-in-salt electrolytes for aqueous lithium-ion batteries with liquidus temperatures below -10 °C	Dr. Ruben-Simon Kühnel Co-Autoren: Maximilian Becker, David Reber, Corsin Battaglia	Empa
P2-47	Enabling Anion Intercalation into Graphite from a Water-based Electrolyte for Aqueous Dual-ion Batteries	Jens Matthies Wrogemann Co-Autoren: Jens Wrogemanna, Sven Künne, Vassilios Siozios, Bo Yan, Jie Li, Martin Winter and Tobias Placke	University of Münster
P2-48	One Step Closer to Realising Next Generation Batteries by Real Time Detection of Electrode Side Reactions by On-line Flow-Cell ICP-OES	N. Shahin Nikman Co-Autoren: B. Wolff, H.E. Hoster	Lancaster University, Energy Lancaster
P2-49	Development of cathodes and electrolytes for their application in polymer-based solid-state cells	Dr. Michael Holzapfel Co-Autoren: Katharina Ahlbrecht, Franziska Klein, Jens Tübke	Fraunhofer-Institut für Chemische Technologie (ICT)
P2-50	Exploring the internal resistance of aqueous zinc ion batteries	Christian Bischoff Co-Autoren: Oliver Fitz, Harald Gentischer, Kai Peter Birke, Hans-Martin Henning and Daniel Biro	Fraunhofer ISE
P3-02	Online parameter estimation of an equivalent circuit cell model – A Comparison of an extended kalman filter and a recursive least squares algorithm	Steven Neupert Co-Autoren: Julia Kowal	Technische Universität Berlin
P3-03	Data Driven Approach for Sensorless Temperature Estimation for Lithium-Ion Cells based on Pulse Resistance Measurements	Sebastian Ludwig Co-Autoren: Ilya Zilberman, Tim Wohlers, Andreas Jossen	Technische Universität München
P3-04	Effect of Venting during Thermal Runaway Propagation	M.Sc. Elisabeth Irene Gillich Co-Autoren: Andreas Jossen	Technical University of Munich
P3-05	Derivation of an impedance based equivalent circuit model to determine the dynamic behavior of lithium-ion batteries	Christina Schmitt Co-Autoren: Alexander Kube, Christopher Heim, Norbert Wagner, K. A. Friedrich	Deutsches Zentrum für Luft- und Raumfahrt
P3-06	The effect of the battery topology on degradation of lithium-ion battery packs	Dr. Jorn Reniers Co-Autoren: David A. Howey	University of Oxford
P3-07	Simulative investigation of the local processes within the microstructure of Li-ion cells and their impact on cell behaviour	Philipp Seegert Co-Autoren: Simon Rihm, Sabine Paarmann, Oliver Queisser, Thomas Wetzel	KIT
P3-08	Correlation of inhomogeneous temperature and current distribution in lithium-ion cells with regard to the degradation	Sabine Paarmann Co-Autoren: Lisa Cloos, Jakob Technau, Thomas Wetzel	KIT
P3-09	Model in the Loop Battery Management Algorithm Assessment	M.Sc. Dominik Jöst Co-Autoren: Andreas Pick, Lakshimi Narayanan Palaniswamy, Nisai Fuengwarodsakul, Dirk Uwe Sauer	ISEA-RWTH Aachen
P3-09	Model in the Loop Battery Management Algorithm Assessment	Marc Junker Co-Autoren: Andreas Pick, Lakshimi Narayanan Palaniswamy, Nisai Fuengwarodsakul, Dirk Uwe Sauer	ISEA-RWTH Aachen
P3-10	Solutions for the development of powerful Li-ion battery ageing models based on reduced laboratory testing - a Machine Learning point of view	Mattin Lucu Co-Autoren: Markel Azkue, Iosu Aizpuru, Egoitz Martinez-Laserna	IK4-Ikerlan Technology Research Centre
P3-11	Parametrization & time-domain transformation of discrete transmission line models for graphite electrodes	Markus Hahn Co-Autoren: Patrick Mößle, Michael A. Danzer	University of Bayreuth
P3-12	State of Health Monitoring Technique for Li-ion Cells Using Frequency Excitation.	Jonghyeon Kim Co-Autoren: Prof. Dr.-Ing. Julia Kowal
P3-13	Model and experimental study: Aging mechanisms on NCA and graphite electrodes harvested from off-grid PV lithium-ion cells	Jing Ying Ko Co-Autoren: Fabian Andres Benavente, Anders Olof Lundblad, Henrik Ekström, Göran Lindbergh	KTH Royal Institute of Technology
P3-14	Influence of Intrinsic Cell Variations, Temperature Gradients and Balancing on the Long Term Performance of Lithium Ion Battery Packs	Julius Schmitt Co-Autoren: Ilya Zilberman, Sebastian Ludwig, Andreas Jossen	Technical University Munich
P3-16	Challenging Common Assumptions of Lithium-Ion Battery Aging Models	M.Sc. Leo Wildfeuer Co-Autoren: Niklas Ruecker, Arpit Maheshwari, Markus Lienkamp	Technical University of Munich
P3-17	Early Thermal Runaway detection in lithium ion batteries by using of a coupled electrical - thermal plausibility model	Jens Grabow Co-Autoren: Nury Orazov, Jacob Klink, Ralf Benger	TU Clausthal
P3-18	Interference Scenarios during Single Cell Impedance Measurements in Automotive Battery Packs	Thomas Landinger Co-Autoren: Stefan Mikl, Fatima Rasras, Günter Schwarzberger, Matthias Rose, Andreas Jossen	Infineon Technologies AG
P3-19	Robust model-based sensor data fusion in a lithium-ion battery pack	Dominik Schneider Co-Autoren: Christian Endisch	Technische Hochschule Ingolstadt
P3-20	Influence of (meta-)parameters on the behavior of state of charge estimation using an extended Kalman Filter	M.Sc Patrick Moessle Co-Autoren: Markus Hahn; Michael A. Danzer	University of Bayreuth
P3-21	Development of a scalable bipolar battery design for multiple battery chemistries	Lukas Wilhelm Co-Autoren: Burfeind J., Greve A., Doetsch C.	Fraunhofer Umsicht
P3-22	Modelling and simulation of battery cells	Shraddha Suhas Kulkarni Co-Autoren: Muhammad Ammad Raza Siddiqui, Filip Vysoudil, Jan-Aut Deeken, Prof. Dr.-Ing. Thomas Vietor	Institut für Konstruktionstechnik, TU Braunschweig
P3-23	Investigating the spatial and temporal behavior of the current density distribution during discharge of lithium-ion cells	Alexander Frank Co-Autoren: Johannes Sturm, Andreas Jossen	Technische Universität München
P3-24	Thickness change investigation of lithium-ion pouch cells using measurements and modelling	Erfan Moyassari Sardehaei Co-Autoren: Nicola Jobst, Margret Wohlfahrt-Mehrens, Andreas Jossen	Technical University of Munich (TUM)
P3-25	Insights into electrochemical decomposition of lithium ion battery electrolytes via 13C labeling of ethylene carbonate	Christoph Peschel Co-Autoren: Jonas Henschel, Fabian Horsthemke, Martin Winter, Sascha Nowak	Westfälische Wilhelms-Universität Münster
P3-26	Preliminary investigation for a best practice assembling symmetrical cells from half and full cells	Philipp Teichert Co-Autoren: Egbert Figgemeier	Volkswagen AG
P3-27	Multi-physics modeling of a planar Na-NiCl2 cell	M. Sc. Martin Hofacker Co-Autoren: Dr. Matthias Schulz, Prof. Dr. Michael Stelter	Fraunhofer IKTS
P3-28	Radio Frequency Impedance Analysis of an 18650 Lithium-Ion Cell	Alexander Blömeke Co-Autoren: Reuel Sabir; Nisai Fuengwarodsakul; Dirk Uwe Sauer	RWTH Aachen University
P3-29	Operando Analyses of Gaseous Decomposition Products during SEI Formation	Marco Leißing Co-Autoren: Tim Schäfer, Martin Winter, Sascha Nowak	MEET Battery Research Center
P3-30	Expanding on battery health indicators with fast cycling at sub-ambient temperature	Alexander Smith Co-Autoren: Pontus Svens, Göran Lindbergh, Rakel Wreland Lindström	KTH Royal Institute of Technology
P3-31	Feasibility study methods to evaluate battery cell connections	Philipp Jocher	Technische Universität München
P3-32	Removal of Hexafluorophosphate for a Faster and Interference Free Analysis of Lithium Ion Battery Decomposition Products	Kristina Kösters Co-Autoren: Laura Nowak, Martin Winter, Sascha Nowak	MEET Battery Research Center
P3-33	Equivalent circuit model of a 180 Ah LFP/graphite home storage cell for model-based state diagnostics	Jonas Braun Co-Autoren: Mehmet Yagci und Wolfgang G. Bessler	Hochschule Offenburg
P3-34	Modelling ageing of NCA-type Li-ion batteries: From half cells to complete batteries	Zhiqiang Chen Co-Autoren: Dmitri L. Danilov; Peter H.L. Notten	Forschungszentrum Jülich
P3-36	The effect of fire protection layers on the safety behaviour of high-performance lithium-ion modules	Alexander Oberland Co-Autoren: Marc Dinse, Nury Orazov, Ralf Benger	Technische Universität Clausthal
P3-38	On-board acquisition of lithium-ion battery impedance for smarter battery management system	Dr. Xueyuan Wang Co-Autoren: Haifeng Dai, Xuezhe Wei, Qijun Chen	Tongji University
P3-41	Internal temperatures of aged commercial Li-ion batteries	Lena Spitthoff Co-Autoren: Preben J. S. Vie, Jan Petter Mæhlen, Odne Stokke Burheim	Norwegian University of Science and Technology
P3-42	Potential safety issues due to combined mechanical loads on lithium-ion 18650 cells	M. Sc. Jonas Soellner	Technische Universität München
P3-43	A Competitive Benchmark of Classification Methods for Battery Aging Data	M.Sc. Dominik Herz	Dr. Ing. h. c. F. Porsche AG
P3-44	Study of the expansion of Li-ion cells with Si-based anodes with a combined approach of measurments and finite-element simulations	Philip Kargl Co-Autoren: Verena Müller, Patrick Kolm, Christoph Breitfuß, Martin Liebenberger, Mario Marinaro, Margret Wohlfahrt-Mehrens, Alex Thaler, Roland Würschum	Virtual Vehicle Research GmbH
P4-01	Hybrid Lithium-Ion Energy Storage Systems for Battery Electric Trains	Thomas Nemeth Co-Autoren: Fabian Meishner, Cem Ünlübayir, Dirk Uwe Sauer	RWTH Aachen University
P4-02	Battery electric road to future – Perspective of a leading engineering services provider	Dr..-Ing. Stephan Schindler	Bosch Engineering GmbH
P4-03	Lithium ion battery electrolyte degradation of field-tested electric vehicle battery cells – comprehensive analytical study	Jonas Henschel Co-Autoren: Fabian Horsthemke, Yannick Philipp Stenzel, Marco Evertz, Sabrina Girod, Constantin Lürenbaum, Kristina Kösters, Simon Wiemers-Meyer, Martin Winter and Sascha Nowak	MEET - Münster Electrochemical Energy Technology, WWU Münster
P4-04	Pseudo Real-Time Capable Optimization Approach for the Energy Management of a Hybrid Train	Cem Ünlübayir Co-Autoren: Thomas Nemeth, Fabian Meishner, Payas Vartak, Dirk Uwe Sauer	eLab / Anlauffabrik, RWTH Aachen
P4-05	Increasing the safety of pouch cells - Passive and active measures for use in electric vehicles	Filip Vysoudil Co-Autoren: Houssin Wehbe, Jan-Aut Deeken, Prof. Dr.-Ing. Thomas Vietor	Technische Universität Braunschweig
P4-07	Mechanical loads on lithium-ion battery packs due to drops in powertool applications	Markus Spielbauer Co-Autoren: Florian Schaeufl, Christian Rosenmueller, Oliver Bohlen, Andreas Jossen	Hochschule München
P4-10	Experimental study on detecting and quantifying lithium-plating with differential voltage analysis and coulometry	Felix Katzer Co-Autoren: Michael A. Danzer	University of Bayreuth
P4-11	Prediction of the Ageing Behavior of Lithium-Ion Batteries using a Machine Learning Approach	M.Sc. Dominique Koster Co-Autoren: Dr. Daniela Fenske, Dr. Julian Schwenzel	Fraunhofer IFAM
P4-12	The influence of different load profiles on the performance and life time of lithium-ion batteries	B.Sc. Stefanie Freese Co-Autoren: Dr. Daniela Fenske, M.Sc. Dominique Koster, Dr. Julian Schwenzel	Fraunhofer IFAM
P4-13	Investigating mechanically constrained lithium-ion batteries - The impact on aging of constant thickness vs. constant pressure	Andreas Aufschläger Co-Autoren: Ludwig Kraft, Korbinian Schmidt, Franz Spingler, Johannes Sturm, Andreas Jossen	Technische Universität München
P4-14	Grid Connected Battery Recharging and Refueling to Optimize Hybrid Commercial Long-Haul Truck Operation	M.Sc. Franz Aubeck Co-Autoren: Johannes Maiterth, Lukas Schäfers	RWTH Aachen University
P4-15	Optimized battery range and safety by highly integrated structures	Herr Philipp Duswald	AVL List GmbH
P4-16	Parameterization of real-time capable models for the electrical-thermal simulation of battery behavior	Michael Schmid Co-Autoren: Christian Endisch	Technische Hochschule Ingolstadt
P4-18	Battery Entropic Heating Coefficient Testing and Use in Cell-level Loss Modeling for Ultra Fast Charging	Jeremy Lempert Co-Autoren: Phillip Kollmeyer, Pawel Malysz, Oliver Gross, James Cotton, Ali Emadi	McMaster University
P4-19	Accurate In-Operando Quantitative Diagnostics of Lithium Ion Cells Using Heat Generation	Ryan Prosser	Imperial College London
P5-01	Improvement of process understanding and process stability within the battery cell production by an optical measuring system	Benjamin Bold Co-Autoren: Hannes W. Weinmann, Prof Dr.-Ing. Jürgen Fleischer	KIT Karlsruher Institut für Technologie
P5-03	Fast Charging Formation	Robin Drees	Technische Universität Braunschweig
P5-04	Posterausstellung / Poster exhibition	Nabil Al Kabir Co-Autoren: Holger Richter, Partner, Director Sales Automotive and Technology	Schlegel und Partner
P5-05	How to recover lithium ion battery electrolytes economically	Michael Möller	MEET Batterieforschungszentrum, Universität Münster
P5-06	Integrated Simulation of the Process Chain for Lithium Ion Battery Electrodes with Focus on Structure Properties and Binder Migration	Thilo Heckmann Co-Autoren: Jochen Eser, Jana Kumberg, Sandro Spiegel, Philip Scharfer, Wilhelm Schabel	Karlsruher Institut für Technologie (KIT)
P5-07	Determining remaining lifetime of second use batteries	Embla Bø Co-Autoren: Julia Wind, Jan Petter Mæhlen and Preben J. Vie	IFE
P5-08	Traceability: Connecting process and product characteristics of continuous processes	Inga Landwehr Co-Autoren: Anselm Lorenzoni, Andreas Aichele, Jonas Lips, Frederik Blum	Fraunhofer-Institut für Produktionstechnik und Automatisierung
P5-09	SmartBatteryMaker – Development of a flexible coating and drying process	Sandro Spiegel Co-Autoren: A. Altvarer, T. Storz, J. Fleischer, P. Scharfer, W. Schabel	Karlsruher Institut für Technologie (KIT)
P5-10	Using product entropy and LCA to estimate environmental impacts of battery recycling	Nicolas von Drachenfels Co-Autoren: Julian Rickert, Steffen Blömeke, Felipe Cerdas, Christoph Herrmann	Technische Universität Braunschweig, Battery LabFactory
P5-11	Modeling Process-Product Interdependencies in Battery Production Chains	Matthias Thomitzek Co-Autoren: O. Schmidt, F. Röder, U. Krewer, C. Herrmann, S. Thiede	Technische Universität Braunschweig
P6-01	Value Stacking in a VPP of distributed BES	Prof Rico Wojanowski	Hochschule Darmstadt
P6-02	All Solid-state Battery based on Bottlebrush Polymer Nanocomposite Electrolyte	Dr. Erabhoina Harimohan Co-Autoren: Dominic Rosenbach, Jannik Petry and Mukundan Thelakkat	University of Bayreuth
P6-04	Thermal Modelling of Utility-Scale Stationary Battery Energy Storage Systems: Analysis of Energetic, Economic and Environmental Performance	M.Sc. Anupam Parlikar Co-Autoren: Holger C. Hesse, Andreas Jossen	Technische Universität München
P6-05	A Modelica-based Simulation Model for Large-Scale Stationary Lithium-Ion Battery Systems	Alexander Reiter Co-Autoren: Dr.-Ing Oliver Sven Bohlen	Hochschule für angewandte Wissenschaften München
P6-06	Development of Iron- and Air-Electrodes for an Iron/Air Battery Stack	Marvin Kosin Co-Autoren: Ammar Talisu; Yigit Durmus; Julian Tornow; Jens Burfeind	Fraunhofer UMSICHT
P7-02	State of the Electric Vehicle Lithium-Ion Battery Market	Dr Sofiane Boukhalfa	PRESCOUTER
P7-03	A raw material criticality and environmental impact assessment of state-of-the-art and post-lithium-ion cathode technologies	Matthew Greenwood Co-Autoren: Marc Wentker, Marius Chofor Asaba, Jens Leker	Westfälische Wilhelms-Universität Münster
P7-04	Scaling up European battery manufacturing: IPCEIs for the implementation of the European Strategic Action Plan on Batteries	Dr. Stefan Wolf Co-Autoren: Marco Evertz, Uwe Seidel	VDI/VDE Innovation + Technik GmbH
P8-01	Extensive Aging Analysis and Modelling of High-Power Lithium-Titanite-Oxide Batteries: Influence of the Passive Electrode Effect and the Gassing Behavior	Thomas Bank Co-Autoren: Jan Feldmann, Stephan Bihn, Dirk-Uwe Sauer	RWTH Aachen

2. Posterausstellung

Poster

P1-02 M. Sc. Felix Aupperle Helmholtz Institut Münster Interphasial and Thermal Reactivity Investigation of Silicon-Graphite Composite Anode Electrodes
P1-03 Gerrit Schälicke Technische Universität Braunschweig Intensive powder pretreatment for a solvent-free production of lithium-ion battery cathodes by hotpressing
P1-04 Julian Mayer Co-Autoren: Dr.-Ing. Wolfgang Haselrieder, Prof. Dr.-Ing. Arno Kwade Institut für Partikeltechnik Effect of the concentration of different conductive additives and binder on processing and properties of lithium-ion battery cathodes
P1-05 Julian Marscheider Technische Universität Berlin Morphology Study of the SEI Layer in Lithium-Ion Batteries under Plating Conditions
P1-06 Dr. Ute Golla-Schindler Co-Autoren: L. Han, P. Gnauck, F. Khanom, F. Perez-Willard, T. Bernthaler and G. Schneider Hochschule Aalen Characterisation of Li-Ion Batteries by Correlative EDS, SIMS, Light-, Raman-, Ion- and Electron Microscopy
P1-07 André Weber Co-Autoren: Sebastian Dierickx, Marius Müller, Johannes Schmieg, Michael Weiss, Dagmar Gerthsen, Ellen Ivers-Tiffée Karlsruhe Institute of Technology (KIT) Detailed electrochemical characterization of LLZO grain and grain boundary resistance and LLZO/Lithium interface resistance
P1-08 Jonathan Helbig Co-Autoren: Richard Schmuch, Verena Naber, Martin Winter, Tobias Placke MEET - Münster Electrochemical Energy Technology, WWU Münster Li/Mn-rich layered transition-metal oxides with low cobalt content as core-shell particles for high-energy cathodes
P1-09 Niloofar Ehteshami-Flammer Co-Autoren: Diogo Vieira Carvalho, Arianna Moretti, Stefano Passerini, Martin Winter, Elie Paillard Forschungszentrum Jülich (IEK-12) Role of the binder in electrode performance with Adiponitrile-based electrolytes
P1-10 Ronald Gordon Co-Autoren: Norbert Willenbacher Karlsruhe Institute of Technology (KIT) Effect of polymeric binders on mechanical integrity and conductivity of water-based electrodes and its correlation to the electrochemical behavior of Li-ion cells
P1-11 Fabienne Huttner Co-Autoren: Wolfgang Haselrieder, Arno Kwade Effect of infrared post-drying and moisture of cell components on structural properties and electrochemical performance of lithium-ion batteries
P1-12 Ishamol Shajji Co-Autoren: Niloofar Ehteshami, Diddo Diddens, Andreas Heuer, Martin Winter, Jijeesh Ravi Nair Dual Salt Solid Polymer Electrolyte for Lithium Metal Battery via In Situ Polymerization Process
P1-13 Karsten Richter Co-Autoren: Thomas Waldmann, Neelima Paul, Nicola Jobst, Christin Hogrefe, Rares-George Scurtu, Michael Hofmann, Ralph Gilles, Margret Wohlfahrt-Mehrens Zentrum für Sonnenenergie- und Wasserstoff-Forschung Baden-Württemberg (ZSW) Chemical Intercalation of Li Metal in Si/C composite Anodes - An operando Neutron Scattering Study
P1-14 Louisa Hoffmann Technische Universität Braunschweig Process quality relationships of the formation result of lithium-ion batteries
P1-15 Niloofar Hamzelui Co-Autoren: Gebrekidan Gebresilassie Eshetu, Max Linhorst, Rita Weyer, Bruno Moerschbacher, Egbert Figgemeier Optimization of Silicon-Graphite Anode and Polymeric Binder Material for Lithium-ion Batteries
P1-16 René Jagau Co-Autoren: Fabienne Huttner; Wolfgang Haselrieder; Arno Kwade Influence of binder on the structure and performance of anodes
P1-17 Robert Löwe Co-Autoren: Thomas Hanemann, Andreas Hofmann Karlsruhe Institute of Technology Polymerized Ionic Liquids for Lithium Conducting Membranes
P1-18 Arnaud du Baret de Limé Co-Autoren: Matthias Coeler, Vanessa van Laack (FhG-IFAM), Sebastian Reuber, Katharina Koschek (FhG-IFAM), Mareike Wolter, Alexander Michaelis Fraunhofer IKTS Solvent-free Processing of Solid State Electrodes Based On A Plastic Crystal Electrolyte System
P1-19 Christiane Rahe Co-Autoren: Dirk Uwe Sauer, Egbert Figgemeier Forschungszentrum Jülich Aging effects of batteries to include in battery models for higher accuracy
P1-20 M.Sc. Mathias Drews Co-Autoren: Peter Haberzettl, Sebastian Tepner, Harald Gentischer, Daniel Biro and Roland Zengerle Fraunhofer ISE Towards 3D-Printed Microbatteries Based on Silicon/Carbon Graphite Blend Anodes
P1-21 Dr. Meinert Lewerenz Co-Autoren: Christiane Rahe, Christian Endisch, Dirk Uwe Sauer Technische Hochschule Ingolstadt Deactivation of electrodes due to dense covering layer formation caused by long-term cycling and storage
P1-22 Bastian Heidrich Co-Autoren: P. Niehoff, M. Börner, M. Winter Westfälische Wilhelms-Universität Münster The Influence of Cell Design on the SEI
P1-24 Dr. Meinert Lewerenz Co-Autoren: Christiane Rahe, Christian Endisch, Dirk Uwe Sauer Technische Hochschule Ingolstadt Investigation of the Influence of Compression of the Cell on Capacity Fade and Homogeneity of Lithium Distribution
P1-25 Dr. Kerstin Neuhaus Co-Autoren: Annika Buchheit, Marija Hoffmeyer, Britta Teßmer, Hans-Dieter Wiemhöfer Westfälische Wilhelms-Universität Münster Application of Kelvin Probe Force microscopy for analysis of barriers for charge transport in solid and hybrid electrolytes
P1-26 Professor Junqian Zhang Shanghai University ON OPTIMAL CHARGING METHODS TO SUPPRESS MECHANICAL DEGRADATION OF SILICON COMPOSITE ELECTRODES
P1-27 Philip Minnmann Co-Autoren: Felix Walther, Raimund Koerver, Felix Richter, Wolfgang G. Zeier, Jürgen Janek Justus-Liebig-Universität Gießen Understanding interfacial challenges in solid-state batteries
P1-28 Dr. Florian Rittweger Co-Autoren: Dr. Christian Modrzynski, Dr. Valentin Roscher, Prof. Dr.-Ing. Karl-Ragmar Riemschneider University of Applied Sciences Hamburg Optical in-situ observation of lithium-ion-battery electrodes for material characterization
P1-30 Dr. Theodoor Anton Hendriks Co-Autoren: D.M. Cunha, X. Hou, D.P. Singh, J. Li, M. Huijben Forschungszentrum Jülich GmbH, Helmholtz-Institute Münster Thin film LiMn2O4 as model for interface studies and enabling Li2Mn2O4 in particle systems
P1-31 Stephane Brice Olouou Guifo Volkswagen AG Theoretical investigation of lithium diffusivity in advanced lithium-ion battery materials
P1-32 Benjamin Hauck Co-Autoren: M. Dippon, A. Weber, E. Ivers-Tiffée Karlsruher Institut für Technologie (KIT) Model based parametrization of advanced fast charging procedures for lithium-ion batteries
P1-33 M.Sc. Christin Hogrefe Co-Autoren: Thomas Waldmann, Karsten Richter, Margret Wohlfahrt-Mehrens ZSW ? Zentrum für Sonnenenergie- und Wasserstoff-Forschung, Baden-Württemberg On the Reaction Mechanisms of Li with Graphite Electrodes
P1-34 Robert Franke-Lang Co-Autoren: Julia Kowal Technische Universität Berlin FEM based modelling of lamellar LiFePO4 electrodes
P1-35 Maximilian Plaß Co-Autoren: Christian Schneider, Anna-Katharina Hatz, Sascha Harm, Igor Moudrakovski, Luzia S. German, Roland Eger, Robert E. Dinnebier, Bettina V. Lotsch Max-Planck-Institut für Festkörperforschung Structure and Electrochemistry of Superionic Thiophosphate- and Sulfide-based Lithium Solid Electrolytes
P1-36 Simon Randau Co-Autoren: Yannik Schneider, Felix Walther, Rajendra Negi, Felix H. Richter, Jürgen Janek Institute of Physical Chemistry & Center for Materials Research (ZFM) Optimizing all solid battery performance to reduce cell degradation
P1-37 Mr Gavin White Co-Autoren: Alastair Hales, Yatish Patel, Gregory Offer Imperial College London Transient Measurement of Heat Generation in Lithium-ion Cells
P1-38 Simone Casino Co-Autoren: Dr. Philip Niehoff, Dr Markus Boerner, Prof. Martin Winter Westfälische Wilhelms-Universität Coating on Silicon and its effect on energy density: a model study
P1-39 Yuki Kawamuro Co-Autoren: Nobuhisa Handa, Makoto Kori, Tetsuya Takahashi HIOKI E.E. CORPORATION Introduction of Evaluation Method for Contact Resistance (Interface Resistance) Between Composite and Current Collector in Lithium Ion Battery Electrode Sheet
P1-40 Dr. Stefan Saager Co-Autoren: Bert Scheffel, Olaf Zywitzki, Thomas Modes, Christoph Metzner Fraunhofer-Institut für Organische Elektronik, Elektronenstrahl- und Plasmatechnik FEP Synthesis of Porous Silicon Thin Film Anodes by Vapor Phase Dealloying
P1-41 Jan-Paul Brinkmann Co-Autoren: Vassilios Siozios, Uta Rodehorst, Jun Wang, Martin Winter, Jie Li Forschungszentrum Jülich GmbH Understanding the Effect of Nb Substitution on Li-Mn-Rich Layered Oxides
P1-42 Matthias Haarmann Co-Autoren: Wolfgang Haselrieder, Arno Kwade Technische Universität Braunschweig Continuous Suspension Production: Influencing electrode properties by knowledge driven extrusion process design
P1-43 Muhammad Ammad Raza Siddiqui Co-Autoren: Shraddha Suhas Kulkarni, Filip Vysoudil, Jan-Aut Deeken, Prof. Dr.-Ing. Thomas Vietor Institute for Engineering Design, Technical University of Braunschweig Investigation on the safety of the battery cell by developing the simulation models of mechanical and thermal abuse tests
P1-44 Maximilian Scheller Co-Autoren: Andreas Jossen Technische Universität München Modelling of Interfacial Resistances for All-Solid-State Battery Cells
P1-45 Dr. Jiangong Zhu Co-Autoren: Dr. Michael Knapp,Dr. Michael Heere,Dr. Daniel R. Sørensen,Dr. Mariyam Susana Dewi Darma,Prof.Haifeng Dai, Prof.Xuezhe Wei, Prof.Helmut Ehrenberg Institute of Applied Materials (IAM), Karlsruhe Institute of Technology (KIT) Investigation of capacity fade mechanisms and modeling for lithium ion batteries cycled under different state of charge ranges
P1-46 Dr. Christian Modrzynski Hochschule für Angewandte Wissenschaften Hamburg Fiber Optical Cell State Monitoring of Anode and Cathode
P1-47 Gereon Stahl Co-Autoren: Dirk Uwe Sauer RWTH Aachen Non-invasive investigation of ageing processes with impedance spectra of high power batteries
P1-48 Jochen Stadler Co-Autoren: Carsten Krupp, Jochen Bandlow, Madeleine Ecker, Arnulf Latz Daimler AG Empirical lifetime modelling based on a design-of-experiment aging test with automotive grade lithium-ion pouch cells
P1-49 Xianlin Luo Co-Autoren: Sylvio Indris and Helmut Ehrenberg Karlsruhe Institute of Technology (KIT) Lithium ion conducting solid electrolytes Li3PS4-Li3PO4 prepared by mechanical milling
P1-50 Robin White Carl Zeiss Microscopy Opportunities for Advanced 3D and 4D Microstructural Characterization of Batteries and Battery Materials
P1-51 Florian Baakes Co-Autoren: Fridolin Röder, Ulrike Krewer Institut für Energie- und Systemverfahrenstechnik Illuminating catalytic species during the thermal runaway of lithium ion batteries
P1-52 Tanja Zünd Co-Autoren: Ludwig Kraft (Institute for Electrical Energy Storage Technology), David Schreiner (Institute for Machine Tools and Industrial Management), Franziska Friedrich (Chair of Technical Electrochemistry), Gunther Reinhart (Institute for Machine Tools and Industrial Management), Andreas Jossen (Institute for Electrical Energy Storage Technology), Hubert A. Gasteiger (Chair of Technical Electrochemistry) Technische Universität München (TUM) A Comparative Cathode Study of an Over-Lithiated and Manganese-Rich HE-NCM with NCA in Multi-Layer Li-Ion Pouch Cells
P1-53 Moritz Hofer Co-Autoren: Michael Grube, Sabrina Zellmer, Peter Michalowski, Arno Kwade Technische Universität Braunschweig, Institute for Particle Technology Upscaling of mechanochemical syntheses of sulfidic solid electrolytes
P1-54 Dr Carl Erik Foss Co-Autoren: Asbjørn Ulvestad, Preben J. Vie, Alexey Y. Koposov, Embla T. Bø, Hanne F. Andersen, Per Erik Vullum and Jan Petter Mæhlen Institute for Energy Technology Silicon-Nitride Materials for Improved Stability of Anodes for Next Generation Li-ion Batteries
P1-55 M.Sc. Alina Wettstein Westfälische Wilhelms-Universität Münster A mechanistic understanding of lithium ion transport in ternary ionic liquid electrolytes
P1-56 Andreas Thum Co-Autoren: Diddo Diddens, Andreas Heuer University of Münster Insights in Structure and Dynamics of PEO – LiTFSI Electrolytes near Graphene Electrodes from Molecular Dynamics Simulations
P1-57 Mr Dimitrios Panagiotis Argyropoulos Co-Autoren: Panagiotis Giotakos, Maria Daletou, Filippos Farmakis Democritus University of Thrace Silicon nanoparticles with a graphene shell as anodes for Lithium Ion Batteries: study of the role of graphene to silicon ratio
P1-58 M.Sc. Laura Gottschalk Co-Autoren: N.Strzelczyk; S. Sachse; W. Haselrieder; A. Kwade Technische Universität Braunschweig Investigation and evaluation of active material blends in high-energy anodes
P1-59 Laura Helmers Co-Autoren: Linus Froböse, Peter Michalowski, Arno Kwade TU Braunschweig Structural and electrochemical characterization of polymer based all-solid-state cathodes manufactured by a scalable process chain
P1-60 M.Sc. Jannes Müller TU Braunschweig Preparation of silicon-carbon composites by fluidized bed granulation
P1-61 Fabian Meishner Co-Autoren: Cem Ünlübayir, Thomas Nemeth, Dirk Uwe Sauer RWTH Aachen University Aging Characterization and Modeling of a Lithium Titanate Oxide-based cell
P1-62 Patrick Harte Co-Autoren: Martin Winter, Sascha Nowak Westfälische Wilhelms-Universität Study of transition metal dissolution and subsequent deposition in lithium ion batteries by means of surface sensitive techniques
P1-63 Till-Niklas Kröger Co-Autoren: Simon Wiemers-Meyer, Martin Winter, Sascha Nowak Westfälische Wilhelms-Universität Münster Investigation of Electronical Contact Loss in Lithium Ion Battery Cathodes by ICP-OES
P1-64 Jan Niedermeier Co-Autoren: Andreas Kopp (Aalen University, KIT), Benjamin Bold (KIT), Timo Bernthaler (Aalen University), Gerhard Schneider (Aalen University) Aalen University Characterization of the cathode current collector using confocal and ion and electron microscopy
P1-65 Dr. Helene Jeske Co-Autoren: Maja Kandula, Sabine Ernst* and Klaus Dilger* Institute of Joining and Welding, TU Braunschweig, Langer Kamp 8, 38106 Braunschweig, Germany *Institute of Environmental and Sustainable Chemistry, Hagenring 30, 38106 Braunschweig, Germany TU Braunschweig, Institut für Füge- und Schweißtechnik LIB cell production with alternative binder and intrinsic conductive polymers
P1-66 Anna-Katharina Hatz Co-Autoren: Palanivel Molaiyan, Sascha Harm, Robert Calaminus, Fiona Treber, Nella Vargas-Barbosa, Peter Michalowski, Arno Kwade, Bettina V. Lotsch Max Planck Institute for Solid State Research Upscaling and solvent stability of the fast LGPS-like solid electrolyte Li7SiPS8
P1-67 Jan-Aut Deeken Technische Universität Braunschweig Development of a powder bed generation process as a basis for the additive manufacturing of three-dimensionally structured thick all-solid-state cathodes
P1-68 Gudrun Wilhelm Co-Autoren: Ute Golla-Schindler, Hubert Schulz, Timo Bernthaler, Gerhard Schneider Hochschule Aalen Li-ion Batteries studied with Correlative Scanning Electron Microscopy and Secondary Ion Mass Spectrometry
P1-69 Dr Henry Auer Co-Autoren: Juliane Hüttl, Kristian Nikolowski, Mareike Wolter Fraunhofer IKTS New developments in the characterisation of all-solid state battery composite cathodes
P1-70 Dr. Alana Zülke Co-Autoren: Yi Li, Peter Keil, Harry Hoster Lancaster University Why high-precision coulometry requires thermal baths?
P1-71 Josef Granwehr Co-Autoren: M.C. Paulus, P. Heitjans, R.-A. Eichel, S. Merz Forschungszentrum Jülich and RWTH Aachen Investigating the Li ion mobility in the Li10GeP2S5 solid electrolyte using multidimensional correlation NMR
P1-72 Ardavan Makvandi Co-Autoren: Dr. Martin Peterlechner, Simone Casino, Dr. Tobias Gallasch, Prof. Dr. Martin Winter, and Prof. Dr. Gerhard Wilde Institute of Materials Physics, University of Münster Analytical Transmission Electron Microscopy studies of LiNi0.6Mn0.2Co0.2O2, LiCoO2, and silicon electrode materials for lithium-ion batteries
P1-73 Mr Robert Burrell Co-Autoren: Alana Zulke, Peter Keil, Harry Hoster Lancaster University Patterns of Charge and Discharge: How they Influence the Homogeneity of Lithium Distribution in Cells with Silicon/Graphite Anodes and their Ageing
P1-74 Ingo Reuter Co-Autoren: Thomas Hanemann, Andreas Hofmann Karlsruher Institut für Technologie Measurement of Li-ion mobility in electrolytes and separators
P1-76 Dr. Michael Ghidiu Co-Autoren: Wolfgang G. Zeier Justus Liebig Universität Gießen Tailoring solution synthesis of thiophosphate solid electrolytes
P2-01 Dr. Daniela Fenske Co-Autoren: Ricardo Sanchez-Aguirre, Julian Schwenzel Fraunhofer-Institut for Manufacturing and Andvanced Materials IFAM Gas diffusion electrodes for metal-air systems: Impact of electrolyte characteristics and wettability behavior
P2-03 Dr. Marian Cristian Stan Co-Autoren: Aleksei Kolesnikov, Tobias Hering, Mengyi Zhang, Peter Maria Bieker, Martin Kolek, Martin Winter Westfälische Wilhelms-Universität Fundamental effect of surface decoration and thickness on the cycling stability of lithium metal electrodes
P2-04 M.Sc. Alexander Gräfenstein Co-Autoren: D. Fenske, M. Piesnack, R. Meyer, J. Schwenzel Fraunhofer-Institut für Fertigungstechnik und Angewandte Materialforschung IFAM Scalability aspects of the zinc-ion battery technology: Upscaling of the copper hexacyanoferrate synthesis as cathode material, electrode processing and guidelines for proper cell design.
P2-05 Aleksei Kolesnikov Co-Autoren: Martin Kolek, Jan Frederik Dohmann, Till Lukas Bongers, Asel Akhmetova, Peter Bieker, Martin Winter, Marian Cristian Stan MEET - Münster Electrochemical Energy Technology, WWU Münster Corrosion of lithium-powder based electrodes in liquid electrolyte
P2-06 Verena Küpers Co-Autoren: Dominik Weintz, Peter Bieker, Martin Winter, Martin Kolek MEET - Münster Electrochemical Energy Technology, WWU Münster Oxidative Stability of MgxClyz+-Based Electrolytes for Mg Batteries – Variation of Stoichiometry and Solvents
P2-07 Dr. Diddo Diddens Co-Autoren: Andreas Heuer, Len Kimms Helmholtz Institute Münster (HI MS), Forschungszentrum Jülich Improvement of Polymer Electrolytes via Molecular Simulations and Polymer Theory
P2-08 Martin Kolek Co-Autoren: Georg Bieker, Verena Küpers, Peter Bieker, Martin Winter MEET - Münster Electrochemical Energy Technology, WWU Münster Conditioning and Speciation of MgCl2/AlCl3-Based Electrolytes for Mg Batteries –A Stoichiometric Point-of-View
P2-09 Johannes Betz Co-Autoren: Jan-Paul Brinkmann, Laura Nowak, Roman Nölle, Constantin Lürenbaum, Martin Kolek, Marian Stan, Martin Winter, Tobias Placke MEET - Münster Electrochemical Energy Technology, WWU Münster Impact of Different Cathode Materials on the Deposition/Dissolution Behavior and Morphology of Li Metal due to Cross Talk
P2-10 Jaschar Atik Co-Autoren: Diddo Diddens, Johannes Thienenkamp, Martin Winter, Elie Paillard A Li-ion solvating pyrrolidinium cation for ionic liquid plasticized PEO-based electrolytes
P2-11 A. Katharina Jäger Co-Autoren: Dr. Sandra Meinhard, Oliver Kesten, Iwetta Hägele, Joanna Komorowska, Anne Wengel, Arndt Borgmeier, Timo Sörgel Aalen University, Research Institute for Innovative Surfaces (FINO) New insights into composite electroforming: pilot plant production of novel binder- and conducting carbon-free battery electrodes
P2-13 Verena Perner University of Münster Investigation on heteroatomic redox polymers as cathode-active materials for rechargeable Li/organic batteries
P2-14 M. Sc. Jan Frederik Dohmann Co-Autoren: Y. Preibisch, V. Küpers, B. Krueger, F. Horsthemke, A. Kolesnikov, M. Zhang, M. Kolek, S. Nowak, M. Stan, G. Wittstock, M. Winter, P. Bieker University of Münster Degradation of ionic liquid-based electrolytes at the current collector interface: Corrosion as a challenge for the application in Lithium/Oxygen cell chemistries
P2-15 Jan Girschik Co-Autoren: Michael Joemann, Anna Grevé, Christian Doetsch Fraunhofer-Institut für Umwelt-, Sicherheits- und Energietechnik UMSICHT Straight cell design as advantage of flow batteries
P2-16 Kristina Borzutzki Co-Autoren: Dengpan Dong, Christian Wölke, Margarita Kruteva, Annika Stellhorn, Martin Winter, Gunther Brunklaus, Dmitry Bedrov Forschungszentrum Jülich (IEK-12) Tuning the Chemical Structure of Single-Ion Conducting Polymer Electrolytes for Optimal Li+ Transport
P2-17 Jan Petit Co-Autoren: Markus Hagen, Sophie Weixler, Martin Joos, Michael Abert, Jens Tübke Fraunhofer Institute for Chemical Technology (ICT) Comparison between carbon anodes in LiC-S full cells and metal anodes in metal/oxygen systems regarding ageing processes
P2-18 Georg Dewald Co-Autoren: Saneyuki Ohno, Jürgen Janek, Wolfgang G. Zeier Physikalisch-Chemisches Institut, Justus-Liebig-Universität Gießen Optimization of all-solid-state Li-S batteries
P2-19 Julian Klemens Co-Autoren: A. Altvater, S. Spiegel, Dr.-Ing. P. Scharfer, Prof. Dr.-Ing. W. Schabel Karlsruher Institut für Technologie Energy Storage beyond Lithium - Challenges of Processing
P2-20 Kristina Pfeifer Co-Autoren: Stefanie Arnold, Öznil Budak, Xianlin Luo, Volker Presser, Helmut Ehrenberg, Sonia Dsoke Karlsruhe Institute of Technology Choosing the right carbon is of vital importance for high performance Sb-based Na-ion batteries
P2-21 Chengping Li Co-Autoren: A. Sarapulova, K. Pfeifer, H. Ehrenberg, S. Dsoke Karlsruhe institute of Technology In Situ Growth Tin Sulfide Nanosheets on Reduced Graphene Oxide as a High-Performance Anode for Potassium-Ion Batteries
P2-22 Nico-Dominik Kohlenbach Co-Autoren: Verena Küpers, Jan Frederik Dohmann, Peter Bieker, Martin Winter, Martin Kolek Westfälische Wilhelms-Universität Münster Magnesium Powder-Based Anodes for Magnesium Batteries
P2-23 M.Sc. Alexander Mayer Co-Autoren: D. Steinle, H.-D. Nguyen, Z. Chen, E. Paillard, S. Passerini, C. Iojoiu, D. Bresser Karlsruhe Institute of Technology (KIT) Single-Ion Conducting Polymer Electrolytes for High-Energy Lithium Batteries
P2-24 Julia Wellmann Co-Autoren: Elie Paillard Forschungszentrum Jülich Pre-Treatment of Lithium Anodes for Lithium Metal Batteries
P2-26 Tobias Lein Co-Autoren: C. Heubner, B. Matthey, M. Schneider, A. Michaelis Fraunhofer IKTS Dresden Electrochemical Alkali-Ion Exchange in Electrode Materials for Secondary Batteries
P2-27 Hannes Kühnle Co-Autoren: Gebrekidan Gebresilassie Eshetu, Egbert Figgemeier ISEA / RWTH Aachen University Optimized Electrolytes for Lithium-Metal \|\| Nickel-Rich Cathode Batteries
P2-28 Lars Oliver Schmidt Institut für Füge- und Schweißtechnik, Technische Universität Braunschweig Laser cutting processes of lithium metal foil for all-solid-state battery systems
P2-29 Benjamin Schüßler Co-Autoren: K. Skadell, M. Schulz, M. Stelter Fraunhofer IKTS Determination and comparison of diffusion coefficients for Na-NiCl2 high temperature batteries by GITT measurements and impedance spectroscopy
P2-30 Hai-Peng Liang Co-Autoren: Zhen Chen, Dominic Bresser, and Stefano Passerini Helmholtz Institute Ulm Photo-Crosslinked Single-Ion Conducting Polymer Electrolytes for Lithium Metal Batteries
P2-31 Felix Weber Co-Autoren: Egbert Figgemeier Forschungszentrum Juelich GmbH Investigations on the Native SEI on Lithium Metal through Scanning Electrochemical Microscopy
P2-32 Mr. M Faisal Jamal Khan Co-Autoren: Vaibhav Kumar Singh University of Applied Sciences Ravensburg-Weingarten Analytical Study and Comparison of Solid and Liquid Batteries For Electric Vehicles and Thermal Management Simulation?
P2-33 M.Sc. Frank Schäfer Co-Autoren: Michael Holzapfel, Thomas Berger and Jens Tübke Fraunhofer-Institut für Chemische Technologie (ICT) Medium-temperature sodium-iodine battery system
P2-34 Srivatsan Ramasubramanian Co-Autoren: Hyein Moon, Ivana Hasa, Stefano Passerini, Olaf Böse, Michael A. Danzer, Magdalena Mandl Helmholtz Institute Ulm DRT analysis of sodium and lithium insertion into hard carbon anodes
P2-35 Xue-Qiang Zhang Co-Autoren: Martin Winter, Peter Bieker, Qiang Zhang Münster Electrochemical Energy Technology Columnar Lithium Metal Anodes
P2-36 Dr Sathiyaraj Kandhasamy Co-Autoren: M.C.M. van de Sanden, M.Tsampas Dutch Institute for Fundamental Energy Research (DIFFER) Challenges behind long-term cyclability of Intermediate Temperature Sodium Sulfur (IT-NaS) Battery
P2-37 Tjark Ingber Co-Autoren: Dominik Liebenau, Martin Kolek, Björn Wankmiller, Peter Bieker, Hans-Dieter Wiemhöfer, Martin Winter University of Muenster Effect of additional cations on the conductivity of solid polymer electrolytes for lithium metal batteries
P2-38 Tobias Hering Co-Autoren: Aleksei Kolesnikov, Marian Cristian Stan, Peter Bieker, Martin Winter Batterieforschungszentrum MEET, WWU Münster Lithium Powder Composite Electrodes for All-Solid-State Li-Metal Batteries
P2-39 Dr Wei Sun University of Muenster A Study of Practical Operating Challenges in Alkaline Electrolyte for Rechargeable Zinc-Air Batteries
P2-40 Felix Gerbig Karlsruhe Institute of Technology (KIT) Posterausstellung / Poster exhibition
P2-41 Dennis Meiling Co-Autoren: Julia Kowal Technische Universität Berlin Cathode Porosity and Catalytical Impact on Specific Discharge Capacity and Cycle Stability in 2D- Lithium-Air Battery Simulation
P2-42 Marc Möller Co-Autoren: Dr. Holger Hesse, Prof. Dr.-Ing. Andreas Jossen Technische Universität München Advantages of energy storage system hybridization: an analytical methodology to find an optimal combination
P2-43 Sebastian Daniel Hirt Co-Autoren: S. Wennig, B. Oberschachtsiek, A. Heinzel ZBT GmbH Improvement of capacity retention and coulombic efficiency of lithium sulfide cathodes for lithium-sulfur batteries
P2-44 Andreas Twyhues Co-Autoren: Mengyi Zhang, Jan Frederik Dohmann, Peter Bieker, Martin Winter Batterieforschungszentrum MEET, Universität Münster The Influence of Nitrile Additives in DMSO-based Electrolytes on Lithium/Oxygen Cells
P2-45 Mr Kudakwashe Chayambuka Co-Autoren: G. Mulder, D.L. Danilov, P.H.L. Notten Forschungszentrum Jülich Electrochemical Modelling of Sodium-ion batteries
P2-46 Dr. Ruben-Simon Kühnel Co-Autoren: Maximilian Becker, David Reber, Corsin Battaglia Empa Water-in-salt electrolytes for aqueous lithium-ion batteries with liquidus temperatures below -10 °C
P2-47 Jens Matthies Wrogemann Co-Autoren: Jens Wrogemanna, Sven Künne, Vassilios Siozios, Bo Yan, Jie Li, Martin Winter and Tobias Placke University of Münster Enabling Anion Intercalation into Graphite from a Water-based Electrolyte for Aqueous Dual-ion Batteries
P2-48 N. Shahin Nikman Co-Autoren: B. Wolff, H.E. Hoster Lancaster University, Energy Lancaster One Step Closer to Realising Next Generation Batteries by Real Time Detection of Electrode Side Reactions by On-line Flow-Cell ICP-OES
P2-49 Dr. Michael Holzapfel Co-Autoren: Katharina Ahlbrecht, Franziska Klein, Jens Tübke Fraunhofer-Institut für Chemische Technologie (ICT) Development of cathodes and electrolytes for their application in polymer-based solid-state cells
P2-50 Christian Bischoff Co-Autoren: Oliver Fitz, Harald Gentischer, Kai Peter Birke, Hans-Martin Henning and Daniel Biro Fraunhofer ISE Exploring the internal resistance of aqueous zinc ion batteries
P3-02 Steven Neupert Co-Autoren: Julia Kowal Technische Universität Berlin Online parameter estimation of an equivalent circuit cell model – A Comparison of an extended kalman filter and a recursive least squares algorithm
P3-03 Sebastian Ludwig Co-Autoren: Ilya Zilberman, Tim Wohlers, Andreas Jossen Technische Universität München Data Driven Approach for Sensorless Temperature Estimation for Lithium-Ion Cells based on Pulse Resistance Measurements
P3-04 M.Sc. Elisabeth Irene Gillich Co-Autoren: Andreas Jossen Technical University of Munich Effect of Venting during Thermal Runaway Propagation
P3-05 Christina Schmitt Co-Autoren: Alexander Kube, Christopher Heim, Norbert Wagner, K. A. Friedrich Deutsches Zentrum für Luft- und Raumfahrt Derivation of an impedance based equivalent circuit model to determine the dynamic behavior of lithium-ion batteries
P3-06 Dr. Jorn Reniers Co-Autoren: David A. Howey University of Oxford The effect of the battery topology on degradation of lithium-ion battery packs
P3-07 Philipp Seegert Co-Autoren: Simon Rihm, Sabine Paarmann, Oliver Queisser, Thomas Wetzel KIT Simulative investigation of the local processes within the microstructure of Li-ion cells and their impact on cell behaviour
P3-08 Sabine Paarmann Co-Autoren: Lisa Cloos, Jakob Technau, Thomas Wetzel KIT Correlation of inhomogeneous temperature and current distribution in lithium-ion cells with regard to the degradation
P3-09 M.Sc. Dominik Jöst Co-Autoren: Andreas Pick, Lakshimi Narayanan Palaniswamy, Nisai Fuengwarodsakul, Dirk Uwe Sauer ISEA-RWTH Aachen Model in the Loop Battery Management Algorithm Assessment
P3-09 Marc Junker Co-Autoren: Andreas Pick, Lakshimi Narayanan Palaniswamy, Nisai Fuengwarodsakul, Dirk Uwe Sauer ISEA-RWTH Aachen Model in the Loop Battery Management Algorithm Assessment
P3-10 Mattin Lucu Co-Autoren: Markel Azkue, Iosu Aizpuru, Egoitz Martinez-Laserna IK4-Ikerlan Technology Research Centre Solutions for the development of powerful Li-ion battery ageing models based on reduced laboratory testing - a Machine Learning point of view
P3-11 Markus Hahn Co-Autoren: Patrick Mößle, Michael A. Danzer University of Bayreuth Parametrization & time-domain transformation of discrete transmission line models for graphite electrodes
P3-12 Jonghyeon Kim Co-Autoren: Prof. Dr.-Ing. Julia Kowal State of Health Monitoring Technique for Li-ion Cells Using Frequency Excitation.
P3-13 Jing Ying Ko Co-Autoren: Fabian Andres Benavente, Anders Olof Lundblad, Henrik Ekström, Göran Lindbergh KTH Royal Institute of Technology Model and experimental study: Aging mechanisms on NCA and graphite electrodes harvested from off-grid PV lithium-ion cells
P3-14 Julius Schmitt Co-Autoren: Ilya Zilberman, Sebastian Ludwig, Andreas Jossen Technical University Munich Influence of Intrinsic Cell Variations, Temperature Gradients and Balancing on the Long Term Performance of Lithium Ion Battery Packs
P3-16 M.Sc. Leo Wildfeuer Co-Autoren: Niklas Ruecker, Arpit Maheshwari, Markus Lienkamp Technical University of Munich Challenging Common Assumptions of Lithium-Ion Battery Aging Models
P3-17 Jens Grabow Co-Autoren: Nury Orazov, Jacob Klink, Ralf Benger TU Clausthal Early Thermal Runaway detection in lithium ion batteries by using of a coupled electrical - thermal plausibility model
P3-18 Thomas Landinger Co-Autoren: Stefan Mikl, Fatima Rasras, Günter Schwarzberger, Matthias Rose, Andreas Jossen Infineon Technologies AG Interference Scenarios during Single Cell Impedance Measurements in Automotive Battery Packs
P3-19 Dominik Schneider Co-Autoren: Christian Endisch Technische Hochschule Ingolstadt Robust model-based sensor data fusion in a lithium-ion battery pack
P3-20 M.Sc Patrick Moessle Co-Autoren: Markus Hahn; Michael A. Danzer University of Bayreuth Influence of (meta-)parameters on the behavior of state of charge estimation using an extended Kalman Filter
P3-21 Lukas Wilhelm Co-Autoren: Burfeind J., Greve A., Doetsch C. Fraunhofer Umsicht Development of a scalable bipolar battery design for multiple battery chemistries
P3-22 Shraddha Suhas Kulkarni Co-Autoren: Muhammad Ammad Raza Siddiqui, Filip Vysoudil, Jan-Aut Deeken, Prof. Dr.-Ing. Thomas Vietor Institut für Konstruktionstechnik, TU Braunschweig Modelling and simulation of battery cells
P3-23 Alexander Frank Co-Autoren: Johannes Sturm, Andreas Jossen Technische Universität München Investigating the spatial and temporal behavior of the current density distribution during discharge of lithium-ion cells
P3-24 Erfan Moyassari Sardehaei Co-Autoren: Nicola Jobst, Margret Wohlfahrt-Mehrens, Andreas Jossen Technical University of Munich (TUM) Thickness change investigation of lithium-ion pouch cells using measurements and modelling
P3-25 Christoph Peschel Co-Autoren: Jonas Henschel, Fabian Horsthemke, Martin Winter, Sascha Nowak Westfälische Wilhelms-Universität Münster Insights into electrochemical decomposition of lithium ion battery electrolytes via 13C labeling of ethylene carbonate
P3-26 Philipp Teichert Co-Autoren: Egbert Figgemeier Volkswagen AG Preliminary investigation for a best practice assembling symmetrical cells from half and full cells
P3-27 M. Sc. Martin Hofacker Co-Autoren: Dr. Matthias Schulz, Prof. Dr. Michael Stelter Fraunhofer IKTS Multi-physics modeling of a planar Na-NiCl2 cell
P3-28 Alexander Blömeke Co-Autoren: Reuel Sabir; Nisai Fuengwarodsakul; Dirk Uwe Sauer RWTH Aachen University Radio Frequency Impedance Analysis of an 18650 Lithium-Ion Cell
P3-29 Marco Leißing Co-Autoren: Tim Schäfer, Martin Winter, Sascha Nowak MEET Battery Research Center Operando Analyses of Gaseous Decomposition Products during SEI Formation
P3-30 Alexander Smith Co-Autoren: Pontus Svens, Göran Lindbergh, Rakel Wreland Lindström KTH Royal Institute of Technology Expanding on battery health indicators with fast cycling at sub-ambient temperature
P3-31 Philipp Jocher Technische Universität München Feasibility study methods to evaluate battery cell connections
P3-32 Kristina Kösters Co-Autoren: Laura Nowak, Martin Winter, Sascha Nowak MEET Battery Research Center Removal of Hexafluorophosphate for a Faster and Interference Free Analysis of Lithium Ion Battery Decomposition Products
P3-33 Jonas Braun Co-Autoren: Mehmet Yagci und Wolfgang G. Bessler Hochschule Offenburg Equivalent circuit model of a 180 Ah LFP/graphite home storage cell for model-based state diagnostics
P3-34 Zhiqiang Chen Co-Autoren: Dmitri L. Danilov; Peter H.L. Notten Forschungszentrum Jülich Modelling ageing of NCA-type Li-ion batteries: From half cells to complete batteries
P3-36 Alexander Oberland Co-Autoren: Marc Dinse, Nury Orazov, Ralf Benger Technische Universität Clausthal The effect of fire protection layers on the safety behaviour of high-performance lithium-ion modules
P3-38 Dr. Xueyuan Wang Co-Autoren: Haifeng Dai, Xuezhe Wei, Qijun Chen Tongji University On-board acquisition of lithium-ion battery impedance for smarter battery management system
P3-41 Lena Spitthoff Co-Autoren: Preben J. S. Vie, Jan Petter Mæhlen, Odne Stokke Burheim Norwegian University of Science and Technology Internal temperatures of aged commercial Li-ion batteries
P3-42 M. Sc. Jonas Soellner Technische Universität München Potential safety issues due to combined mechanical loads on lithium-ion 18650 cells
P3-43 M.Sc. Dominik Herz Dr. Ing. h. c. F. Porsche AG A Competitive Benchmark of Classification Methods for Battery Aging Data
P3-44 Philip Kargl Co-Autoren: Verena Müller, Patrick Kolm, Christoph Breitfuß, Martin Liebenberger, Mario Marinaro, Margret Wohlfahrt-Mehrens, Alex Thaler, Roland Würschum Virtual Vehicle Research GmbH Study of the expansion of Li-ion cells with Si-based anodes with a combined approach of measurments and finite-element simulations
P4-01 Thomas Nemeth Co-Autoren: Fabian Meishner, Cem Ünlübayir, Dirk Uwe Sauer RWTH Aachen University Hybrid Lithium-Ion Energy Storage Systems for Battery Electric Trains
P4-02 Dr..-Ing. Stephan Schindler Bosch Engineering GmbH Battery electric road to future – Perspective of a leading engineering services provider
P4-03 Jonas Henschel Co-Autoren: Fabian Horsthemke, Yannick Philipp Stenzel, Marco Evertz, Sabrina Girod, Constantin Lürenbaum, Kristina Kösters, Simon Wiemers-Meyer, Martin Winter and Sascha Nowak MEET - Münster Electrochemical Energy Technology, WWU Münster Lithium ion battery electrolyte degradation of field-tested electric vehicle battery cells – comprehensive analytical study
P4-04 Cem Ünlübayir Co-Autoren: Thomas Nemeth, Fabian Meishner, Payas Vartak, Dirk Uwe Sauer eLab / Anlauffabrik, RWTH Aachen Pseudo Real-Time Capable Optimization Approach for the Energy Management of a Hybrid Train
P4-05 Filip Vysoudil Co-Autoren: Houssin Wehbe, Jan-Aut Deeken, Prof. Dr.-Ing. Thomas Vietor Technische Universität Braunschweig Increasing the safety of pouch cells - Passive and active measures for use in electric vehicles
P4-07 Markus Spielbauer Co-Autoren: Florian Schaeufl, Christian Rosenmueller, Oliver Bohlen, Andreas Jossen Hochschule München Mechanical loads on lithium-ion battery packs due to drops in powertool applications
P4-10 Felix Katzer Co-Autoren: Michael A. Danzer University of Bayreuth Experimental study on detecting and quantifying lithium-plating with differential voltage analysis and coulometry
P4-11 M.Sc. Dominique Koster Co-Autoren: Dr. Daniela Fenske, Dr. Julian Schwenzel Fraunhofer IFAM Prediction of the Ageing Behavior of Lithium-Ion Batteries using a Machine Learning Approach
P4-12 B.Sc. Stefanie Freese Co-Autoren: Dr. Daniela Fenske, M.Sc. Dominique Koster, Dr. Julian Schwenzel Fraunhofer IFAM The influence of different load profiles on the performance and life time of lithium-ion batteries
P4-13 Andreas Aufschläger Co-Autoren: Ludwig Kraft, Korbinian Schmidt, Franz Spingler, Johannes Sturm, Andreas Jossen Technische Universität München Investigating mechanically constrained lithium-ion batteries - The impact on aging of constant thickness vs. constant pressure
P4-14 M.Sc. Franz Aubeck Co-Autoren: Johannes Maiterth, Lukas Schäfers RWTH Aachen University Grid Connected Battery Recharging and Refueling to Optimize Hybrid Commercial Long-Haul Truck Operation
P4-15 Herr Philipp Duswald AVL List GmbH Optimized battery range and safety by highly integrated structures
P4-16 Michael Schmid Co-Autoren: Christian Endisch Technische Hochschule Ingolstadt Parameterization of real-time capable models for the electrical-thermal simulation of battery behavior
P4-18 Jeremy Lempert Co-Autoren: Phillip Kollmeyer, Pawel Malysz, Oliver Gross, James Cotton, Ali Emadi McMaster University Battery Entropic Heating Coefficient Testing and Use in Cell-level Loss Modeling for Ultra Fast Charging
P4-19 Ryan Prosser Imperial College London Accurate In-Operando Quantitative Diagnostics of Lithium Ion Cells Using Heat Generation
P5-01 Benjamin Bold Co-Autoren: Hannes W. Weinmann, Prof Dr.-Ing. Jürgen Fleischer KIT Karlsruher Institut für Technologie Improvement of process understanding and process stability within the battery cell production by an optical measuring system
P5-03 Robin Drees Technische Universität Braunschweig Fast Charging Formation
P5-04 Nabil Al Kabir Co-Autoren: Holger Richter, Partner, Director Sales Automotive and Technology Schlegel und Partner Posterausstellung / Poster exhibition
P5-05 Michael Möller MEET Batterieforschungszentrum, Universität Münster How to recover lithium ion battery electrolytes economically
P5-06 Thilo Heckmann Co-Autoren: Jochen Eser, Jana Kumberg, Sandro Spiegel, Philip Scharfer, Wilhelm Schabel Karlsruher Institut für Technologie (KIT) Integrated Simulation of the Process Chain for Lithium Ion Battery Electrodes with Focus on Structure Properties and Binder Migration
P5-07 Embla Bø Co-Autoren: Julia Wind, Jan Petter Mæhlen and Preben J. Vie IFE Determining remaining lifetime of second use batteries
P5-08 Inga Landwehr Co-Autoren: Anselm Lorenzoni, Andreas Aichele, Jonas Lips, Frederik Blum Fraunhofer-Institut für Produktionstechnik und Automatisierung Traceability: Connecting process and product characteristics of continuous processes
P5-09 Sandro Spiegel Co-Autoren: A. Altvarer, T. Storz, J. Fleischer, P. Scharfer, W. Schabel Karlsruher Institut für Technologie (KIT) SmartBatteryMaker – Development of a flexible coating and drying process
P5-10 Nicolas von Drachenfels Co-Autoren: Julian Rickert, Steffen Blömeke, Felipe Cerdas, Christoph Herrmann Technische Universität Braunschweig, Battery LabFactory Using product entropy and LCA to estimate environmental impacts of battery recycling
P5-11 Matthias Thomitzek Co-Autoren: O. Schmidt, F. Röder, U. Krewer, C. Herrmann, S. Thiede Technische Universität Braunschweig Modeling Process-Product Interdependencies in Battery Production Chains
P6-01 Prof Rico Wojanowski Hochschule Darmstadt Value Stacking in a VPP of distributed BES
P6-02 Dr. Erabhoina Harimohan Co-Autoren: Dominic Rosenbach, Jannik Petry and Mukundan Thelakkat University of Bayreuth All Solid-state Battery based on Bottlebrush Polymer Nanocomposite Electrolyte
P6-04 M.Sc. Anupam Parlikar Co-Autoren: Holger C. Hesse, Andreas Jossen Technische Universität München Thermal Modelling of Utility-Scale Stationary Battery Energy Storage Systems: Analysis of Energetic, Economic and Environmental Performance
P6-05 Alexander Reiter Co-Autoren: Dr.-Ing Oliver Sven Bohlen Hochschule für angewandte Wissenschaften München A Modelica-based Simulation Model for Large-Scale Stationary Lithium-Ion Battery Systems
P6-06 Marvin Kosin Co-Autoren: Ammar Talisu; Yigit Durmus; Julian Tornow; Jens Burfeind Fraunhofer UMSICHT Development of Iron- and Air-Electrodes for an Iron/Air Battery Stack
P7-02 Dr Sofiane Boukhalfa PRESCOUTER State of the Electric Vehicle Lithium-Ion Battery Market
P7-03 Matthew Greenwood Co-Autoren: Marc Wentker, Marius Chofor Asaba, Jens Leker Westfälische Wilhelms-Universität Münster A raw material criticality and environmental impact assessment of state-of-the-art and post-lithium-ion cathode technologies
P7-04 Dr. Stefan Wolf Co-Autoren: Marco Evertz, Uwe Seidel VDI/VDE Innovation + Technik GmbH Scaling up European battery manufacturing: IPCEIs for the implementation of the European Strategic Action Plan on Batteries
P8-01 Thomas Bank Co-Autoren: Jan Feldmann, Stephan Bihn, Dirk-Uwe Sauer RWTH Aachen Extensive Aging Analysis and Modelling of High-Power Lithium-Titanite-Oxide Batteries: Influence of the Passive Electrode Effect and the Gassing Behavior

1. Parallelsessions

1. Parallelsessions

2. Posterausstellung

2. Posterausstellung

Veranstalter

Veranstaltungsort

Medienpartner